This patch introduce TF-A support for NXP's ls1043a platform.
more details information of ls1043a chip and ls1043ardb board
can be found at docs/plat/ls1043a.rst.
Boot sequence on ls1043a is: bootrom loads bl1 firstly, then bl1
loads bl2, bl2 will load bl31, bl32 and bl33, bl31 will boot
bl32(tee os) and bl33(u-boot or uefi), bl33 boot Linux kernel.
Now TF-A on ls1043ardb platform has the following features in this patch:
* Support boot from Nor flash.
* TF-A can boot bl33 which runs in el2 of non-secure world.
* TF-A boot OPTee OS.
* Support PSCI
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Signed-off-by: Chenyin.Ha <Chenyin.Ha@nxp.com>
Signed-off-by: Chenhui Zhao <chenhui.zhao@nxp.com>
Signed-off-by: jiaheng.fan <jiaheng.fan@nxp.com>
Signed-off-by: Wen He <wen.he_1@nxp.com>
--- /dev/null
+Description
+===========
+
+The QorIQ® LS1043A processor is NXP's first quad-core, 64-bit Arm®-based
+processor for embedded networking. The LS1023A (two core version) and the
+LS1043A (four core version) deliver greater than 10 Gbps of performance
+in a flexible I/O package supporting fanless designs. This SoC is a
+purpose-built solution for small-form-factor networking and industrial
+applications with BOM optimizations for economic low layer PCB, lower cost
+power supply and single clock design. The new 0.9V versions of the LS1043A
+and LS1023A deliver addition power savings for applications such as Wireless
+LAN and to Power over Ethernet systems.
+
+LS1043ARDB Specification:
+-------------------------
+Memory subsystem:
+ * 2GByte DDR4 SDRAM (32bit bus)
+ * 128 Mbyte NOR flash single-chip memory
+ * 512 Mbyte NAND flash
+ * 16 Mbyte high-speed SPI flash
+ * SD connector to interface with the SD memory card
+
+Ethernet:
+ * XFI 10G port
+ * QSGMII with 4x 1G ports
+ * Two RGMII ports
+
+PCIe:
+ * PCIe2 (Lanes C) to mini-PCIe slot
+ * PCIe3 (Lanes D) to PCIe slot
+
+USB 3.0: two super speed USB 3.0 type A ports
+
+UART: supports two UARTs up to 115200 bps for console
+
+More information are listed in `ls1043`_.
+
+Boot Sequence
+=============
+
+
+Bootrom --> TF-A BL1 --> TF-A BL2 --> TF-A BL1 --> TF-A BL31
+--> BL32(Tee OS) --> TF-A BL31 --> BL33(u-boot) --> Linux kernel
+
+
+How to build
+============
+
+Build Procedure
+---------------
+
+- Prepare AARCH64 toolchain.
+
+- Build u-boot and OPTee firstly, and get binary images: u-boot.bin and tee.bin
+
+- Build TF-A for Nor boot
+
+ Build bl1:
+
+ .. code:: shell
+
+ CROSS_COMPILE=aarch64-linux-gnu- make PLAT=ls1043 bl1
+
+ Build fip:
+
+ .. code:: shell
+
+ CROSS_COMPILE=aarch64-linux-gnu- make PLAT=ls1043 fip \
+ BL33=u-boot.bin NEED_BL32=yes BL32=tee.bin SPD=opteed
+
+Deploy TF-A Images
+-----------------
+
+- Deploy TF-A images on Nor flash Alt Bank.
+
+ .. code:: shell
+
+ => tftp 82000000 bl1.bin
+ => pro off all;era 64100000 +$filesize;cp.b 82000000 64100000 $filesize
+
+ => tftp 82000000 fip.bin
+ => pro off all;era 64120000 +$filesize;cp.b 82000000 64120000 $filesize
+
+ Then change to Alt bank and boot up TF-A:
+
+ .. code:: shell
+
+ => cpld reset altbank
+
+
+.. _ls1043: https://www.nxp.com/products/processors-and-microcontrollers/arm-based-processors-and-mcus/qoriq-layerscape-arm-processors/qoriq-layerscape-1043a-and-1023a-multicore-communications-processors:LS1043A?lang_cd=en
- plat/mediatek/\*
+NXP QorIQ Layerscape platform sub-maintainer
+--------------------------------------
+Jiafei Pan (jiafei.pan@nxp.com, `qoriq-open-source`_)
+
+Files:
+
+- docs/plat/ls1043a.rst
+- plat/layerscape/\*
+
Raspberry Pi 3 platform sub-maintainer
--------------------------------------
.. _sivadur: https://github.com/sivadur
.. _rockchip-linux: https://github.com/rockchip-linux
.. _etienne-lms: https://github.com/etienne-lms
+.. _qoriq-open-source: https://github.com/qoriq-open-source
--- /dev/null
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch.h>
+#include <asm_macros.S>
+#include <platform_def.h>
+
+ .globl plat_reset_handler
+ .globl plat_my_core_pos
+ .globl platform_mem_init
+
+func plat_my_core_pos
+ mrs x0, mpidr_el1
+ and x1, x0, #MPIDR_CPU_MASK //reserve the last 8 bits
+ and x0, x0, #MPIDR_CLUSTER_MASK
+ add x0, x1, x0, LSR #4 //4 cores
+ ret
+endfunc plat_my_core_pos
+
+func platform_mem_init
+ mov x29, x30
+ bl inv_dcache_range
+
+//SDRAM_CFG
+ ldr w0, =0x1080000
+ ldr w1, =0x0c000c45
+ str w1, [x0, #0x110]
+//CS0_BNDS
+ ldr w1, =0x7f000000
+ str w1, [x0, #0x000]
+//CS0_CONFIG
+ ldr w1, =0x22030480
+ str w1, [x0, #0x080]
+//TIMING_CFG_0
+ ldr w1, =0x18005591
+ str w1, [x0, #0x104]
+//TIMING_CFG_1
+ ldr w1, =0x428cb4bb
+ str w1, [x0, #0x108]
+//TIMING_CFG_2
+ ldr w1, =0x11c14800
+ str w1, [x0, #0x10C]
+//TIMING_CFG_3
+ ldr w1, =0x00100c01
+ str w1, [x0, #0x100]
+//TIMING_CFG_4
+ ldr w1, =0x02000000
+ str w1, [x0, #0x160]
+//TIMING_CFG_5
+ ldr w1, =0x00144003
+ str w1, [x0, #0x164]
+//TIMING_CFG_7
+ ldr w1, =0x00003013
+ str w1, [x0, #0x16C]
+//TIMING_CFG_8
+ ldr w1, =0x00561102
+ str w1, [x0, #0x250]
+//SDRAM_CFG_2
+ ldr w1, =0x00114000
+ str w1, [x0, #0x114]
+//SDRAM_MODE
+ ldr w1, =0x10020103
+ str w1, [x0, #0x118]
+//SDRAM_MODE_2
+ ldr w1, =0x0
+ str w1, [x0, #0x11C]
+//SDRAM_INTERVAL
+ ldr w1, =0x18066018
+ str w1, [x0, #0x124]
+//DDR_WRLVL_CNTL
+ ldr w1, =0x07f675c6
+ str w1, [x0, #0x174]
+//DDR_WRLVL_CNTL_2
+ ldr w1, =0x00080907
+ str w1, [x0, #0x190]
+//DDR_WRLVL_CNTL_3
+ ldr w1, =0x0
+ str w1, [x0, #0x194]
+//DDR_CDR1
+ ldr w1, =0x00000480
+ str w1, [x0, #0xB28]
+//DDR_CDR2
+ ldr w1, =0x81a10000
+ str w1, [x0, #0xB2C]
+//SDRAM_CLK_CNTL
+ ldr w1, =0x00000003
+ str w1, [x0, #0x130]
+//DDR_ZQ_CNTL
+ ldr w1, =0x0507098a
+ str w1, [x0, #0x170]
+//SDRAM_MODE_9
+ ldr w1, =0x00050000
+ str w1, [x0, #0x220]
+//SDRAM_MODE_10
+ ldr w1, =0x00000004
+ str w1, [x0, #0x224]
+//CS0_CONFIG_2
+ ldr w1, =0x0
+ str w1, [x0, #0x0C0]
+//SDRAM_CFG
+ ldr w1, =0x08000cc5
+ str w1, [x0, #0x110]
+
+ mov w3,#0
+ ldr w4,=0xffffff01
+z_loop:
+delay_loop1:
+ sub w4, w4, #1
+ cmp w4, #0
+ b.gt delay_loop1
+
+ ldr w1, [x0, #0x114]
+ add w3, w3, #1
+ cmp w1, #0 //'\n'
+ b.eq 1f
+ cmp w3, #20
+ b.gt 1f
+ b z_loop
+
+1:
+ ldr w4,=0xffffff02
+delay_loop2:
+ sub w4, w4, #1
+ cmp w4, #0
+ b.gt delay_loop2
+
+ ldr w1, =0x00000000
+ str w1, [x0]
+
+ ret x29
+endfunc platform_mem_init
+
+func apply_platform_errata
+ /*TODO if needed*/
+ ret
+endfunc apply_platform_errata
+
+func plat_reset_handler
+ mov x29, x30
+ bl apply_platform_errata
+
+ mov x30, x29
+ ret
+endfunc plat_reset_handler
--- /dev/null
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef __LS_DEF_H__
+#define __LS_DEF_H__
+
+#include <arch.h>
+#include <common_def.h>
+#include <platform_def.h>
+#include <tbbr_img_def.h>
+#include <utils_def.h>
+#include <xlat_tables_defs.h>
+
+
+/******************************************************************************
+ * Definitions common to all ARM standard platforms
+ *****************************************************************************/
+/* Special value used to verify platform parameters from BL2 to BL31 */
+#define LS_BL31_PLAT_PARAM_VAL 0x0f1e2d3c4b5a6978ULL
+
+#define LS_CACHE_WRITEBACK_SHIFT 6
+
+/*
+ * Macros mapping the MPIDR Affinity levels to Layerscape Platform Power levels. The
+ * power levels have a 1:1 mapping with the MPIDR affinity levels.
+ */
+#define LS_PWR_LVL0 MPIDR_AFFLVL0
+#define LS_PWR_LVL1 MPIDR_AFFLVL1
+#define LS_PWR_LVL2 MPIDR_AFFLVL2
+
+/*
+ * Macros for local power states in Layerscape platforms encoded by State-ID field
+ * within the power-state parameter.
+ */
+/* Local power state for power domains in Run state. */
+#define LS_LOCAL_STATE_RUN 0
+/* Local power state for retention. Valid only for CPU power domains */
+#define LS_LOCAL_STATE_RET 1
+/*
+ * Local power state for OFF/power-down. Valid for CPU and cluster power
+ * domains
+ */
+#define LS_LOCAL_STATE_OFF 2
+
+#define LS_MAP_NS_DRAM MAP_REGION_FLAT( \
+ (LS_NS_DRAM_BASE), \
+ LS_DRAM1_SIZE, \
+ MT_DEVICE | MT_RW | MT_NS)
+
+#define LS_MAP_TSP_SEC_MEM MAP_REGION_FLAT( \
+ TSP_SEC_MEM_BASE, \
+ TSP_SEC_MEM_SIZE, \
+ MT_DEVICE | MT_RW | MT_SECURE)
+
+
+#define LS_MAP_FLASH0_RW MAP_REGION_FLAT(PLAT_LS_FLASH_BASE,\
+ PLAT_LS_FLASH_SIZE, \
+ MT_DEVICE | MT_RW)
+
+#define LS_MAP_CCSR MAP_REGION_FLAT(PLAT_LS_CCSR_BASE, \
+ PLAT_LS_CCSR_SIZE, \
+ MT_DEVICE | MT_RW | MT_SECURE)
+
+
+#define LS_MAP_CONSOLE MAP_REGION_FLAT(PLAT_LS1043_DUART1_BASE, \
+ PLAT_LS1043_DUART_SIZE, \
+ MT_DEVICE | MT_RW | MT_NS)
+
+/*
+ * The number of regions like RO(code), coherent and data required by
+ * different BL stages which need to be mapped in the MMU.
+ */
+/******************************************************************************
+ * Required platform porting definitions common to all ARM standard platforms
+ *****************************************************************************/
+
+#define PLAT_PHY_ADDR_SPACE_SIZE (1ull << 32)
+#define PLAT_VIRT_ADDR_SPACE_SIZE (1ull << 32)
+
+/*
+ * This macro defines the deepest retention state possible. A higher state
+ * id will represent an invalid or a power down state.
+ */
+#define PLAT_MAX_RET_STATE LS_LOCAL_STATE_RET
+
+/*
+ * This macro defines the deepest power down states possible. Any state ID
+ * higher than this is invalid.
+ */
+#define PLAT_MAX_OFF_STATE LS_LOCAL_STATE_OFF
+
+/*
+ * Some data must be aligned on the biggest cache line size in the platform.
+ * This is known only to the platform as it might have a combination of
+ * integrated and external caches.
+ */
+#define CACHE_WRITEBACK_GRANULE (1 << LS_CACHE_WRITEBACK_SHIFT)
+
+/*
+ * One cache line needed for bakery locks on Layerscape platforms
+ */
+#define PLAT_PERCPU_BAKERY_LOCK_SIZE (1 * CACHE_WRITEBACK_GRANULE)
+
+#endif /* __LS_DEF_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef __FSL_NS_ACCESS_H_
+#define __FSL_NS_ACCESS_H_
+
+#include "fsl_csu.h"
+
+enum csu_cslx_ind {
+ CSU_CSLX_PCIE2_IO = 0,
+ CSU_CSLX_PCIE1_IO,
+ CSU_CSLX_MG2TPR_IP,
+ CSU_CSLX_IFC_MEM,
+ CSU_CSLX_OCRAM,
+ CSU_CSLX_GIC,
+ CSU_CSLX_PCIE1,
+ CSU_CSLX_OCRAM2,
+ CSU_CSLX_QSPI_MEM,
+ CSU_CSLX_PCIE2,
+ CSU_CSLX_SATA,
+ CSU_CSLX_USB1,
+ CSU_CSLX_QM_BM_SWPORTAL,
+ CSU_CSLX_PCIE3 = 16,
+ CSU_CSLX_PCIE3_IO,
+ CSU_CSLX_USB3 = 20,
+ CSU_CSLX_USB2,
+ CSU_CSLX_PFE = 23,
+ CSU_CSLX_SERDES = 32,
+ CSU_CSLX_QDMA,
+ CSU_CSLX_LPUART2,
+ CSU_CSLX_LPUART1,
+ CSU_CSLX_LPUART4,
+ CSU_CSLX_LPUART3,
+ CSU_CSLX_LPUART6,
+ CSU_CSLX_LPUART5,
+ CSU_CSLX_DSPI1 = 41,
+ CSU_CSLX_QSPI,
+ CSU_CSLX_ESDHC,
+ CSU_CSLX_IFC = 45,
+ CSU_CSLX_I2C1,
+ CSU_CSLX_USB_2,
+ CSU_CSLX_I2C3 = 48,
+ CSU_CSLX_I2C2,
+ CSU_CSLX_DUART2 = 50,
+ CSU_CSLX_DUART1,
+ CSU_CSLX_WDT2,
+ CSU_CSLX_WDT1,
+ CSU_CSLX_EDMA,
+ CSU_CSLX_SYS_CNT,
+ CSU_CSLX_DMA_MUX2,
+ CSU_CSLX_DMA_MUX1,
+ CSU_CSLX_DDR,
+ CSU_CSLX_QUICC,
+ CSU_CSLX_DCFG_CCU_RCPM = 60,
+ CSU_CSLX_SECURE_BOOTROM,
+ CSU_CSLX_SFP,
+ CSU_CSLX_TMU,
+ CSU_CSLX_SECURE_MONITOR,
+ CSU_CSLX_SCFG,
+ CSU_CSLX_FM = 66,
+ CSU_CSLX_SEC5_5,
+ CSU_CSLX_BM,
+ CSU_CSLX_QM,
+ CSU_CSLX_GPIO2 = 70,
+ CSU_CSLX_GPIO1,
+ CSU_CSLX_GPIO4,
+ CSU_CSLX_GPIO3,
+ CSU_CSLX_PLATFORM_CONT,
+ CSU_CSLX_CSU,
+ CSU_CSLX_IIC4 = 77,
+ CSU_CSLX_WDT4,
+ CSU_CSLX_WDT3,
+ CSU_CSLX_ESDHC2 = 80,
+ CSU_CSLX_WDT5 = 81,
+ CSU_CSLX_SAI2,
+ CSU_CSLX_SAI1,
+ CSU_CSLX_SAI4,
+ CSU_CSLX_SAI3,
+ CSU_CSLX_FTM2 = 86,
+ CSU_CSLX_FTM1,
+ CSU_CSLX_FTM4,
+ CSU_CSLX_FTM3,
+ CSU_CSLX_FTM6 = 90,
+ CSU_CSLX_FTM5,
+ CSU_CSLX_FTM8,
+ CSU_CSLX_FTM7,
+ CSU_CSLX_DSCR = 121,
+};
+
+static struct csu_ns_dev ns_dev[] = {
+ {CSU_CSLX_PCIE2_IO, CSU_ALL_RW},
+ {CSU_CSLX_PCIE1_IO, CSU_ALL_RW},
+ {CSU_CSLX_MG2TPR_IP, CSU_ALL_RW},
+ {CSU_CSLX_IFC_MEM, CSU_ALL_RW},
+ {CSU_CSLX_OCRAM, CSU_ALL_RW},
+ {CSU_CSLX_GIC, CSU_ALL_RW},
+ {CSU_CSLX_PCIE1, CSU_ALL_RW},
+ {CSU_CSLX_OCRAM2, CSU_ALL_RW},
+ {CSU_CSLX_QSPI_MEM, CSU_ALL_RW},
+ {CSU_CSLX_PCIE2, CSU_ALL_RW},
+ {CSU_CSLX_SATA, CSU_ALL_RW},
+ {CSU_CSLX_USB1, CSU_ALL_RW},
+ {CSU_CSLX_QM_BM_SWPORTAL, CSU_ALL_RW},
+ {CSU_CSLX_PCIE3, CSU_ALL_RW},
+ {CSU_CSLX_PCIE3_IO, CSU_ALL_RW},
+ {CSU_CSLX_USB3, CSU_ALL_RW},
+ {CSU_CSLX_USB2, CSU_ALL_RW},
+ {CSU_CSLX_PFE, CSU_ALL_RW},
+ {CSU_CSLX_SERDES, CSU_ALL_RW},
+ {CSU_CSLX_QDMA, CSU_ALL_RW},
+ {CSU_CSLX_LPUART2, CSU_ALL_RW},
+ {CSU_CSLX_LPUART1, CSU_ALL_RW},
+ {CSU_CSLX_LPUART4, CSU_ALL_RW},
+ {CSU_CSLX_LPUART3, CSU_ALL_RW},
+ {CSU_CSLX_LPUART6, CSU_ALL_RW},
+ {CSU_CSLX_LPUART5, CSU_ALL_RW},
+ {CSU_CSLX_DSPI1, CSU_ALL_RW},
+ {CSU_CSLX_QSPI, CSU_ALL_RW},
+ {CSU_CSLX_ESDHC, CSU_ALL_RW},
+ {CSU_CSLX_IFC, CSU_ALL_RW},
+ {CSU_CSLX_I2C1, CSU_ALL_RW},
+ {CSU_CSLX_USB_2, CSU_ALL_RW},
+ {CSU_CSLX_I2C3, CSU_ALL_RW},
+ {CSU_CSLX_I2C2, CSU_ALL_RW},
+ {CSU_CSLX_DUART2, CSU_ALL_RW},
+ {CSU_CSLX_DUART1, CSU_ALL_RW},
+ {CSU_CSLX_WDT2, CSU_ALL_RW},
+ {CSU_CSLX_WDT1, CSU_ALL_RW},
+ {CSU_CSLX_EDMA, CSU_ALL_RW},
+ {CSU_CSLX_SYS_CNT, CSU_ALL_RW},
+ {CSU_CSLX_DMA_MUX2, CSU_ALL_RW},
+ {CSU_CSLX_DMA_MUX1, CSU_ALL_RW},
+ {CSU_CSLX_DDR, CSU_ALL_RW},
+ {CSU_CSLX_QUICC, CSU_ALL_RW},
+ {CSU_CSLX_DCFG_CCU_RCPM, CSU_ALL_RW},
+ {CSU_CSLX_SECURE_BOOTROM, CSU_ALL_RW},
+ {CSU_CSLX_SFP, CSU_ALL_RW},
+ {CSU_CSLX_TMU, CSU_ALL_RW},
+ {CSU_CSLX_SECURE_MONITOR, CSU_ALL_RW},
+ {CSU_CSLX_SCFG, CSU_ALL_RW},
+ {CSU_CSLX_FM, CSU_ALL_RW},
+ {CSU_CSLX_SEC5_5, CSU_ALL_RW},
+ {CSU_CSLX_BM, CSU_ALL_RW},
+ {CSU_CSLX_QM, CSU_ALL_RW},
+ {CSU_CSLX_GPIO2, CSU_ALL_RW},
+ {CSU_CSLX_GPIO1, CSU_ALL_RW},
+ {CSU_CSLX_GPIO4, CSU_ALL_RW},
+ {CSU_CSLX_GPIO3, CSU_ALL_RW},
+ {CSU_CSLX_PLATFORM_CONT, CSU_ALL_RW},
+ {CSU_CSLX_CSU, CSU_ALL_RW},
+ {CSU_CSLX_IIC4, CSU_ALL_RW},
+ {CSU_CSLX_WDT4, CSU_ALL_RW},
+ {CSU_CSLX_WDT3, CSU_ALL_RW},
+ {CSU_CSLX_ESDHC2, CSU_ALL_RW},
+ {CSU_CSLX_WDT5, CSU_ALL_RW},
+ {CSU_CSLX_SAI2, CSU_ALL_RW},
+ {CSU_CSLX_SAI1, CSU_ALL_RW},
+ {CSU_CSLX_SAI4, CSU_ALL_RW},
+ {CSU_CSLX_SAI3, CSU_ALL_RW},
+ {CSU_CSLX_FTM2, CSU_ALL_RW},
+ {CSU_CSLX_FTM1, CSU_ALL_RW},
+ {CSU_CSLX_FTM4, CSU_ALL_RW},
+ {CSU_CSLX_FTM3, CSU_ALL_RW},
+ {CSU_CSLX_FTM6, CSU_ALL_RW},
+ {CSU_CSLX_FTM5, CSU_ALL_RW},
+ {CSU_CSLX_FTM8, CSU_ALL_RW},
+ {CSU_CSLX_FTM7, CSU_ALL_RW},
+ {CSU_CSLX_DSCR, CSU_ALL_RW},
+};
+
+#endif
--- /dev/null
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef __PLAT_MACROS_S__
+#define __PLAT_MACROS_S__
+
+ /* ---------------------------------------------
+ * The below required platform porting macro
+ * prints out relevant GIC and CCI registers
+ * whenever an unhandled exception is taken in
+ * BL31.
+ * Clobbers: x0 - x10, x16, x17, sp
+ * ---------------------------------------------
+ */
+ .macro plat_crash_print_regs
+ .endm
+
+#endif /* __PLAT_MACROS_S__ */
--- /dev/null
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef __PLATFORM_DEF_H__
+#define __PLATFORM_DEF_H__
+
+#include <common_def.h>
+#include <tzc400.h>
+#include <utils.h>
+#include "ls_def.h"
+
+#define FIRMWARE_WELCOME_STR_LS1043 "Welcome to LS1043 BL1 Phase\n"
+#define FIRMWARE_WELCOME_STR_LS1043_BL2 "Welcome to LS1043 BL2 Phase\n"
+#define FIRMWARE_WELCOME_STR_LS1043_BL31 "Welcome to LS1043 BL31 Phase\n"
+#define FIRMWARE_WELCOME_STR_LS1043_BL32 "Welcome to LS1043 BL32 Phase, TSP\n"
+
+/* Required platform porting definitions */
+#define PLAT_PRIMARY_CPU 0x0
+#define PLAT_MAX_PWR_LVL LS_PWR_LVL1
+#define PLATFORM_CORE_COUNT 4
+#define COUNTER_FREQUENCY 25000000 /* 25MHz */
+
+/*
+ * Required LS standard platform porting definitions
+ */
+#define PLAT_LS_CLUSTER_COUNT 1
+#define PLAT_LS1043_CCI_CLUSTER0_SL_IFACE_IX 4
+#define LS1043_CLUSTER_COUNT 1
+#define LS1043_MAX_CPUS_PER_CLUSTER 4
+
+#define LS_DRAM1_BASE 0x80000000
+#define LS_DRAM2_BASE 0x880000000
+#define LS_DRAM2_SIZE 0x780000000 /* 30G */
+#define LS_DRAM1_SIZE 0x80000000 /* 2G */
+#define LS_NS_DRAM_BASE LS_DRAM1_BASE
+/* 64M Secure Memory, in fact there a 2M non-secure hole on top of it */
+#define LS_SECURE_DRAM_SIZE (64 * 1024 * 1024)
+#define LS_SECURE_DRAM_BASE (LS_NS_DRAM_BASE + LS_DRAM1_SIZE - \
+ LS_SECURE_DRAM_SIZE)
+#define LS_NS_DRAM_SIZE (LS_DRAM1_SIZE - LS_SECURE_DRAM_SIZE)
+
+/*
+ * By default, BL2 is in DDR memory.
+ * If LS_BL2_IN_OCRAM is defined, BL2 will in OCRAM
+ */
+/* #define LS_BL2_IN_OCRAM */
+
+#ifndef LS_BL2_IN_OCRAM
+/*
+ * on top of SECURE memory is 2M non-secure hole for OPTee,
+ * 1M secure memory below this hole will be used for BL2.
+ */
+#define LS_BL2_DDR_BASE (LS_SECURE_DRAM_BASE + \
+ LS_SECURE_DRAM_SIZE \
+ - 3 * 1024 * 1024)
+#endif
+
+#define PLAT_LS_CCSR_BASE 0x1000000
+#define PLAT_LS_CCSR_SIZE 0xF000000
+
+/* Flash base address, currently ROM is not used for TF-A images on LS platforms */
+#define PLAT_LS_TRUSTED_ROM_BASE 0x60100000
+#define PLAT_LS_TRUSTED_ROM_SIZE 0x20000000 /* Flash size */
+#define PLAT_LS_FLASH_SIZE 0x20000000
+#define PLAT_LS_FLASH_BASE 0x60000000
+
+#define LS_SRAM_BASE 0x10000000
+#define LS_SRAM_LIMIT 0x10020000 /* 128K */
+#define LS_SRAM_SHARED_SIZE 0x1000 /* 4K */
+#define LS_SRAM_SIZE (LS_SRAM_LIMIT - LS_SRAM_BASE)
+#define LS_BL_RAM_BASE (LS_SRAM_BASE + LS_SRAM_SHARED_SIZE)
+
+#define PLAT_LS_FIP_MAX_SIZE 0x4000000
+
+/* Memory Layout */
+
+#define BL1_RO_BASE PLAT_LS_TRUSTED_ROM_BASE
+#define BL1_RO_LIMIT (PLAT_LS_TRUSTED_ROM_BASE \
+ + PLAT_LS_TRUSTED_ROM_SIZE)
+#define PLAT_LS_FIP_BASE 0x60120000
+
+#ifdef LS_BL2_IN_OCRAM
+/* BL2 is in OCRAM */
+#define PLAT_LS_MAX_BL1_RW_SIZE (52 * 1024) /* 52K */
+#define PLAT_LS_MAX_BL31_SIZE (64 * 1024) /* 64K */
+#define PLAT_LS_MAX_BL2_SIZE (44 * 1024) /* 44K */
+/* Reserve memory in OCRAM for BL31 Text and ROData segment */
+#define BL31_TEXT_RODATA_SIZE (32 * 1024) /* 32K */
+#else /* LS_BL2_IN_OCRAM */
+/* BL2 in DDR */
+#define PLAT_LS_MAX_BL1_RW_SIZE (64 * 1024) /* 64K */
+#define PLAT_LS_MAX_BL31_SIZE (64 * 1024) /* 64K */
+#define PLAT_LS_MAX_BL2_SIZE (1 * 1024 * 1024) /* 1M */
+#endif /* LS_BL2_IN_OCRAM */
+/*
+ * Put BL31 at the start of OCRAM.
+ */
+#define BL31_BASE LS_SRAM_BASE
+#define BL31_LIMIT (LS_SRAM_BASE + PLAT_LS_MAX_BL31_SIZE)
+
+#ifdef LS_BL2_IN_OCRAM
+/*
+ * BL2 follow BL31 Text and ROData region.
+ */
+#define BL2_BASE (BL31_BASE + BL31_TEXT_RODATA_SIZE)
+#define BL2_LIMIT (BL2_BASE + PLAT_LS_MAX_BL2_SIZE)
+
+#else
+/*
+ * BL2 in DDR memory.
+ */
+#define BL2_BASE LS_BL2_DDR_BASE
+#define BL2_LIMIT (BL2_BASE + PLAT_LS_MAX_BL2_SIZE)
+
+#endif
+
+/*
+ * Put BL1 RW at the top of the Trusted SRAM.
+ */
+#ifdef LS_BL2_IN_OCRAM
+#define BL1_RW_BASE BL2_LIMIT
+#else
+#define BL1_RW_BASE BL31_LIMIT
+#endif
+#define BL1_RW_LIMIT LS_SRAM_LIMIT
+
+/* Put BL32 in secure memory */
+#define BL32_BASE LS_SECURE_DRAM_BASE
+#define BL32_LIMIT (LS_SECURE_DRAM_BASE + LS_SECURE_DRAM_SIZE)
+/* BL33 memory region */
+#define BL33_BASE 0x82000000
+#define BL33_LIMIT (LS_NS_DRAM_BASE + LS_NS_DRAM_SIZE)
+
+/*******************************************************************************
+ * BL32 specific defines.
+ ******************************************************************************/
+/*
+ * On ARM standard platforms, the TSP can execute from Trusted SRAM,
+ * Trusted DRAM (if available) or the DRAM region secured by the TrustZone
+ * controller.
+ */
+
+#define TSP_SEC_MEM_BASE BL32_BASE
+#define TSP_SEC_MEM_SIZE (BL32_LIMIT - BL32_BASE)
+
+/*
+ * ID of the secure physical generic timer interrupt used by the TSP.
+ */
+#define TSP_IRQ_SEC_PHY_TIMER 29
+
+
+/*
+ * GIC related constants
+ */
+#define PLAT_LS1043_CCI_BASE 0x01180000
+#define GICD_BASE 0x01401000
+#define GICC_BASE 0x01402000
+#define GICD_BASE_64K 0x01410000
+#define GICC_BASE_64K 0x01420000
+
+#define DCFG_CCSR_SVR 0x1ee00a4
+#define REV1_0 0x10
+#define REV1_1 0x11
+#define GIC_ADDR_BIT 31
+#define SCFG_GIC400_ALIGN 0x1570188
+
+/* UART related definition */
+
+#define PLAT_LS1043_DUART1_BASE 0x021c0000
+#define PLAT_LS1043_DUART2_BASE 0x021d0000
+#define PLAT_LS1043_DUART_SIZE 0x10000
+
+#define PLAT_LS1043_UART_BASE 0x21c0500
+#define PLAT_LS1043_UART2_BASE 0x21c0600
+#define PLAT_LS1043_UART_CLOCK 400000000
+#define PLAT_LS1043_UART_BAUDRATE 115200
+/* Define UART to be used by TF-A log */
+#define LS_TF_UART_BASE PLAT_LS1043_UART_BASE
+#define LS_TF_UART_CLOCK PLAT_LS1043_UART_CLOCK
+#define LS_TF_UART_BAUDRATE PLAT_LS1043_UART_BAUDRATE
+
+#define LS1043_SYS_CNTCTL_BASE 0x2B00000
+
+#define CONFIG_SYS_IMMR 0x01000000
+#define CONFIG_SYS_FSL_CSU_ADDR (CONFIG_SYS_IMMR + 0x00510000)
+
+/* Size of cacheable stacks */
+#if defined(IMAGE_BL1)
+#define PLATFORM_STACK_SIZE 0x440
+#define MAX_MMAP_REGIONS 6
+#define MAX_XLAT_TABLES 4
+#elif defined(IMAGE_BL2)
+#define PLATFORM_STACK_SIZE 0x400
+#define MAX_MMAP_REGIONS 8
+#define MAX_XLAT_TABLES 6
+#elif defined(IMAGE_BL31)
+#define PLATFORM_STACK_SIZE 0x400
+#define MAX_MMAP_REGIONS 8
+#define MAX_XLAT_TABLES 4
+#elif defined(IMAGE_BL32)
+#define PLATFORM_STACK_SIZE 0x440
+#define MAX_MMAP_REGIONS 8
+#define MAX_XLAT_TABLES 9
+#endif
+
+#define MAX_IO_DEVICES 3
+#define MAX_IO_HANDLES 4
+
+#endif /* __PLATFORM_DEF_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef _SOC_TZASC_H_
+#define _SOC_TZASC_H_
+
+#include "tzc380.h"
+
+#define MAX_NUM_TZC_REGION 3
+
+/* TZASC related constants */
+#define TZASC_CONFIGURATION_REG 0x000
+#define TZASC_SECURITY_INV_REG 0x034
+#define TZASC_SECURITY_INV_EN 0x1
+#define TZASC_REGIONS_REG 0x100
+/* As region address should address atleast 32KB memory. */
+#define TZASC_REGION_LOWADDR_MASK 0xFFFF8000
+#define TZASC_REGION_LOWADDR_OFFSET 0x0
+#define TZASC_REGION_HIGHADDR_OFFSET 0x4
+#define TZASC_REGION_ATTR_OFFSET 0x8
+#define TZASC_REGION_ENABLED 1
+#define TZASC_REGION_DISABLED 0
+#define TZASC_REGION_SIZE_32KB 0xE
+#define TZASC_REGION_SIZE_64KB 0xF
+#define TZASC_REGION_SIZE_128KB 0x10
+#define TZASC_REGION_SIZE_256KB 0x11
+#define TZASC_REGION_SIZE_512KB 0x12
+#define TZASC_REGION_SIZE_1MB 0x13
+#define TZASC_REGION_SIZE_2MB 0x14
+#define TZASC_REGION_SIZE_4MB 0x15
+#define TZASC_REGION_SIZE_8MB 0x16
+#define TZASC_REGION_SIZE_16MB 0x17
+#define TZASC_REGION_SIZE_32MB 0x18
+#define TZASC_REGION_SIZE_64MB 0x19
+#define TZASC_REGION_SIZE_128MB 0x1A
+#define TZASC_REGION_SIZE_256MB 0x1B
+#define TZASC_REGION_SIZE_512MB 0x1C
+#define TZASC_REGION_SIZE_1GB 0x1D
+#define TZASC_REGION_SIZE_2GB 0x1E
+#define TZASC_REGION_SIZE_4GB 0x1F
+#define TZASC_REGION_SIZE_8GB 0x20
+#define TZASC_REGION_SIZE_16GB 0x21
+#define TZASC_REGION_SIZE_32GB 0x22
+#define TZASC_REGION_SECURITY_SR (1 << 3)
+#define TZASC_REGION_SECURITY_SW (1 << 2)
+#define TZASC_REGION_SECURITY_SRW (TZASC_REGION_SECURITY_SR| \
+ TZASC_REGION_SECURITY_SW)
+#define TZASC_REGION_SECURITY_NSR (1 << 1)
+#define TZASC_REGION_SECURITY_NSW 1
+#define TZASC_REGION_SECURITY_NSRW (TZASC_REGION_SECURITY_NSR| \
+ TZASC_REGION_SECURITY_NSW)
+
+#define CSU_SEC_ACCESS_REG_OFFSET 0x21C
+#define TZASC_BYPASS_MUX_DISABLE 0x4
+#define CCI_TERMINATE_BARRIER_TX 0x8
+#define CONFIG_SYS_FSL_TZASC_ADDR 0x1500000
+
+/* List of MAX_NUM_TZC_REGION TZC regions' boundaries and configurations. */
+
+static const struct tzc380_reg tzc380_reg_list[] = {
+ {
+ TZASC_REGION_SECURITY_NSRW, /* .secure attr */
+ 0x0, /* .enabled */
+ 0x0, /* .lowaddr */
+ 0x0, /* .highaddr */
+ 0x0, /* .size */
+ 0x0, /* .submask */
+ },
+ {
+ TZASC_REGION_SECURITY_SRW,
+ TZASC_REGION_ENABLED,
+ 0xFC000000,
+ 0x0,
+ TZASC_REGION_SIZE_64MB,
+ 0x80, /* Disable region 7 */
+ },
+ /* reserve 2M non-scure memory for OPTEE public memory */
+ {
+ TZASC_REGION_SECURITY_SRW,
+ TZASC_REGION_ENABLED,
+ 0xFF800000,
+ 0x0,
+ TZASC_REGION_SIZE_8MB,
+ 0xC0, /* Disable region 6 & 7 */
+ },
+
+ {}
+};
+
+#endif /* _SOC_TZASC_H_ */
--- /dev/null
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <cci.h>
+#include <debug.h>
+#include <mmio.h>
+#include "plat_ls.h"
+
+static const int cci_map[] = {
+ PLAT_LS1043_CCI_CLUSTER0_SL_IFACE_IX
+};
+
+void bl1_platform_setup(void)
+{
+ NOTICE(FIRMWARE_WELCOME_STR_LS1043);
+
+ ls_bl1_platform_setup();
+
+ /*
+ * Initialize system level generic timer for Layerscape Socs.
+ */
+ ls_delay_timer_init();
+
+ /* TODO: remove these DDR code */
+ VERBOSE("CS0_BNDS = %x\n", mmio_read_32(0x1080000 + 0x000));
+ mmio_write_32(0x1080000 + 0x000, 0x7f000000);
+ VERBOSE("CS0_BNDS = %x\n", mmio_read_32(0x1080000 + 0x000));
+}
+
+/*******************************************************************************
+ * Perform any BL1 specific platform actions.
+ ******************************************************************************/
+void bl1_early_platform_setup(void)
+{
+ ls_bl1_early_platform_setup();
+
+ /*
+ * Initialize Interconnect for this cluster during cold boot.
+ * No need for locks as no other CPU is active.
+ */
+ cci_init(PLAT_LS1043_CCI_BASE, cci_map, ARRAY_SIZE(cci_map));
+
+ /*
+ * Enable coherency in Interconnect for the primary CPU's cluster.
+ */
+ cci_enable_snoop_dvm_reqs(MPIDR_AFFLVL1_VAL(read_mpidr()));
+
+}
+
+unsigned int bl1_plat_get_next_image_id(void)
+{
+ return BL2_IMAGE_ID;
+}
--- /dev/null
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <mmio.h>
+#include <debug.h>
+#include "plat_ls.h"
+
+void bl2_early_platform_setup2(u_register_t arg0, u_register_t arg1,
+ u_register_t arg2, u_register_t arg3)
+{
+ ls_bl2_early_platform_setup((meminfo_t *)arg1);
+
+ /*
+ * Initialize system level generic timer for Layerscape Socs.
+ */
+ ls_delay_timer_init();
+}
+
+void bl2_platform_setup(void)
+{
+ NOTICE(FIRMWARE_WELCOME_STR_LS1043_BL2);
+}
--- /dev/null
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <cci.h>
+#include <debug.h>
+#include "plat_ls.h"
+#include "fsl_csu.h"
+
+/* slave interfaces according to the RM */
+static const int cci_map[] = {
+ 4,
+};
+
+void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1,
+ u_register_t arg2, u_register_t arg3)
+{
+#ifdef LS_BL2_IN_OCRAM
+ unsigned long romem_base = (unsigned long)(&__TEXT_START__);
+ unsigned long romem_size = (unsigned long)(&__RODATA_END__)
+ - romem_base;
+
+ /* Check the Text and RO-Data region size */
+ if (romem_size > BL31_TEXT_RODATA_SIZE) {
+ ERROR("BL31 Text and RO-Data region size exceed reserved memory size\n");
+ panic();
+ }
+#endif
+
+ /*
+ * Initialize system level generic timer for Layerscape Socs.
+ */
+ ls_delay_timer_init();
+
+ ls_bl31_early_platform_setup((void *)arg0, (void *)arg3);
+
+ /*
+ * Initialize the correct interconnect for this cluster during cold
+ * boot. No need for locks as no other CPU is active.
+ */
+ cci_init(PLAT_LS1043_CCI_BASE, cci_map, ARRAY_SIZE(cci_map));
+
+ /*
+ * Enable coherency in interconnect for the primary CPU's cluster.
+ * Earlier bootloader stages might already do this (e.g. Trusted
+ * Firmware's BL1 does it) but we can't assume so. There is no harm in
+ * executing this code twice anyway.
+ */
+ cci_enable_snoop_dvm_reqs(MPIDR_AFFLVL1_VAL(read_mpidr()));
+
+ /* Init CSU to enable non-secure access to peripherals */
+ enable_layerscape_ns_access();
+}
--- /dev/null
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch_helpers.h>
+#include <debug.h>
+#include <errno.h>
+#include <stdint.h>
+
+/*
+ * Error handler
+ */
+void plat_error_handler(int err)
+{
+ switch (err) {
+ case -ENOENT:
+ case -EAUTH:
+ /* ToDo */
+ break;
+ default:
+ /* Unexpected error */
+ break;
+ }
+
+ /* Loop until the watchdog resets the system */
+ for (;;)
+ wfi();
+}
--- /dev/null
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch_helpers.h>
+#include <debug.h>
+#include <errno.h>
+#include <assert.h>
+#include <platform.h>
+#include <psci.h>
+#include <mmio.h>
+#include <sys/endian.h>
+#include <gicv2.h>
+#include <delay_timer.h>
+#include "platform_def.h"
+
+#define LS_SCFG_BASE 0x01570000
+/* register to store warm boot entry, big endian, higher 32bit */
+#define LS_SCFG_SCRATCHRW0_OFFSET 0x600
+/* register to store warm boot entry, big endian, lower 32bit */
+#define LS_SCFG_SCRATCHRW1_OFFSET 0x604
+#define LS_SCFG_COREBCR_OFFSET 0x680
+
+#define LS_DCFG_BASE 0x01EE0000
+#define LS_DCFG_RSTCR_OFFSET 0x0B0
+#define LS_DCFG_RSTRQMR1_OFFSET 0x0C0
+#define LS_DCFG_BRR_OFFSET 0x0E4
+
+#define LS_SCFG_CORE0_SFT_RST_OFFSET 0x130
+#define LS_SCFG_CORE1_SFT_RST_OFFSET 0x134
+#define LS_SCFG_CORE2_SFT_RST_OFFSET 0x138
+#define LS_SCFG_CORE3_SFT_RST_OFFSET 0x13C
+
+#define LS_SCFG_CORESRENCR_OFFSET 0x204
+
+#define LS_SCFG_RVBAR0_0_OFFSET 0x220
+#define LS_SCFG_RVBAR0_1_OFFSET 0x224
+
+#define LS_SCFG_RVBAR1_0_OFFSET 0x228
+#define LS_SCFG_RVBAR1_1_OFFSET 0x22C
+
+#define LS_SCFG_RVBAR2_0_OFFSET 0x230
+#define LS_SCFG_RVBAR2_1_OFFSET 0x234
+
+#define LS_SCFG_RVBAR3_0_OFFSET 0x238
+#define LS_SCFG_RVBAR3_1_OFFSET 0x23C
+
+/* the entry for core warm boot */
+static uintptr_t warmboot_entry;
+
+/* warm reset single core */
+static void ls1043_reset_core(int core_pos)
+{
+ assert(core_pos >= 0 && core_pos < PLATFORM_CORE_COUNT);
+
+ /* set 0 in RVBAR, boot from bootrom at 0x0 */
+ mmio_write_32(LS_SCFG_BASE + LS_SCFG_RVBAR0_0_OFFSET + core_pos * 8,
+ 0);
+ mmio_write_32(LS_SCFG_BASE + LS_SCFG_RVBAR0_1_OFFSET + core_pos * 8,
+ 0);
+
+ dsb();
+ /* enable core soft reset */
+ mmio_write_32(LS_SCFG_BASE + LS_SCFG_CORESRENCR_OFFSET,
+ htobe32(1 << 31));
+ dsb();
+ isb();
+ /* reset core */
+ mmio_write_32(LS_SCFG_BASE + LS_SCFG_CORE0_SFT_RST_OFFSET +
+ core_pos * 4, htobe32(1 << 31));
+ mdelay(10);
+}
+
+static void __dead2 ls1043_system_reset(void)
+{
+ /* clear reset request mask bits */
+ mmio_write_32(LS_DCFG_BASE + LS_DCFG_RSTRQMR1_OFFSET, 0);
+
+ /* set reset request bit */
+ mmio_write_32(LS_DCFG_BASE + LS_DCFG_RSTCR_OFFSET,
+ htobe32((uint32_t)0x2));
+
+ /* system will reset; if fail, enter wfi */
+ dsb();
+ isb();
+ wfi();
+
+ panic();
+}
+
+
+static int ls1043_pwr_domain_on(u_register_t mpidr)
+{
+ int core_pos = plat_core_pos_by_mpidr(mpidr);
+ uint32_t core_mask = 1 << core_pos;
+ uint32_t brr;
+
+ assert(core_pos >= 0 && core_pos < PLATFORM_CORE_COUNT);
+
+ /* set warm boot entry */
+ mmio_write_32(LS_SCFG_BASE + LS_SCFG_SCRATCHRW0_OFFSET,
+ htobe32((uint32_t)(warmboot_entry >> 32)));
+
+ mmio_write_32(LS_SCFG_BASE + LS_SCFG_SCRATCHRW1_OFFSET,
+ htobe32((uint32_t)warmboot_entry));
+
+ dsb();
+
+ brr = be32toh(mmio_read_32(LS_DCFG_BASE + LS_DCFG_BRR_OFFSET));
+ if (brr & core_mask) {
+ /* core has been released, must reset it to restart */
+ ls1043_reset_core(core_pos);
+
+ /* set bit in core boot control register to enable boot */
+ mmio_write_32(LS_SCFG_BASE + LS_SCFG_COREBCR_OFFSET,
+ htobe32(core_mask));
+
+ } else {
+ /* set bit in core boot control register to enable boot */
+ mmio_write_32(LS_SCFG_BASE + LS_SCFG_COREBCR_OFFSET,
+ htobe32(core_mask));
+
+ /* release core */
+ mmio_write_32(LS_DCFG_BASE + LS_DCFG_BRR_OFFSET,
+ htobe32(brr | core_mask));
+ }
+
+ mdelay(20);
+
+ /* wake core in case it is in wfe */
+ dsb();
+ isb();
+ sev();
+
+ return PSCI_E_SUCCESS;
+}
+
+static void ls1043_pwr_domain_on_finish(const psci_power_state_t *target_state)
+{
+ /* Per cpu gic distributor setup */
+ gicv2_pcpu_distif_init();
+
+ /* Enable the gic CPU interface */
+ gicv2_cpuif_enable();
+}
+
+static void ls1043_pwr_domain_off(const psci_power_state_t *target_state)
+{
+ /* Disable the gic CPU interface */
+ gicv2_cpuif_disable();
+}
+
+static plat_psci_ops_t ls1043_psci_pm_ops = {
+ .system_reset = ls1043_system_reset,
+ .pwr_domain_on = ls1043_pwr_domain_on,
+ .pwr_domain_on_finish = ls1043_pwr_domain_on_finish,
+ .pwr_domain_off = ls1043_pwr_domain_off,
+};
+
+int plat_setup_psci_ops(uintptr_t sec_entrypoint,
+ const plat_psci_ops_t **psci_ops)
+{
+ warmboot_entry = sec_entrypoint;
+ *psci_ops = &ls1043_psci_pm_ops;
+ return 0;
+}
--- /dev/null
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include "plat_ls.h"
+
+/*
+ * We assume that all security programming is done by the primary core.
+ */
+void plat_ls_security_setup(void)
+{
+ tzc380_setup();
+}
--- /dev/null
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch_helpers.h>
+#include <stdint.h>
+
+#define RANDOM_CANARY_VALUE ((u_register_t) 3288484550995823360ULL)
+
+u_register_t plat_get_stack_protector_canary(void)
+{
+ /*
+ * Ideally, a random number should be returned instead of the
+ * combination of a timer's value and a compile-time constant. As the
+ * FVP does not have any random number generator, this is better than
+ * nothing but not necessarily really secure.
+ */
+ return RANDOM_CANARY_VALUE ^ read_cntpct_el0();
+}
--- /dev/null
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch.h>
+#include <cassert.h>
+#include "plat_ls.h"
+#include "platform_def.h"
+
+unsigned char ls1043_power_domain_tree_desc[LS1043_CLUSTER_COUNT + 1];
+
+
+CASSERT(LS1043_CLUSTER_COUNT && LS1043_CLUSTER_COUNT <= 256,
+ assert_invalid_ls1043_cluster_count);
+
+/*******************************************************************************
+ * This function dynamically constructs the topology according to
+ * LS1043_CLUSTER_COUNT and returns it.
+ ******************************************************************************/
+const unsigned char *plat_get_power_domain_tree_desc(void)
+{
+ int i;
+
+ ls1043_power_domain_tree_desc[0] = LS1043_CLUSTER_COUNT;
+
+ for (i = 0; i < LS1043_CLUSTER_COUNT; i++)
+ ls1043_power_domain_tree_desc[i + 1] =
+ LS1043_MAX_CPUS_PER_CLUSTER;
+
+ return ls1043_power_domain_tree_desc;
+}
+
+/*******************************************************************************
+ * This function returns the core count within the cluster corresponding to
+ * `mpidr`.
+ ******************************************************************************/
+unsigned int plat_ls_get_cluster_core_count(u_register_t mpidr)
+{
+ return LS1043_MAX_CPUS_PER_CLUSTER;
+}
+
+/*******************************************************************************
+ * This function implements a part of the critical interface between the psci
+ * generic layer and the platform that allows the former to query the platform
+ * to convert an MPIDR to a unique linear index. An error code (-1) is returned
+ * in case the MPIDR is invalid.
+ ******************************************************************************/
+int plat_core_pos_by_mpidr(u_register_t mpidr)
+{
+ if (ls_check_mpidr(mpidr) == -1)
+ return -1;
+
+ return plat_ls_calc_core_pos(mpidr);
+}
--- /dev/null
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <mmio.h>
+#include <debug.h>
+#include <endian.h>
+#include "platform_def.h"
+#include "soc.h"
+
+/*
+ * Get GIC offset
+ * For LS1043a rev1.0, GIC base address align with 4k.
+ * For LS1043a rev1.1, if DCFG_GIC400_ALIGN[GIC_ADDR_BIT]
+ * is set, GIC base address align with 4K, or else align
+ * with 64k.
+ */
+void get_gic_offset(uint32_t *gicc_base, uint32_t *gicd_base)
+{
+
+ uint32_t *ccsr_svr = (uint32_t *)DCFG_CCSR_SVR;
+ uint32_t *gic_align = (uint32_t *)SCFG_GIC400_ALIGN;
+ uint32_t val;
+ uint32_t soc_dev_id;
+
+ val = be32toh(mmio_read_32((uintptr_t)ccsr_svr));
+ soc_dev_id = val & (SVR_WO_E << 8);
+
+ if ((soc_dev_id == (SVR_LS1043A << 8) ||
+ soc_dev_id == (SVR_LS1043AE << 8)) &&
+ ((val & 0xff) == REV1_1)) {
+ val = be32toh(mmio_read_32((uintptr_t)gic_align));
+ if (val & (1 << GIC_ADDR_BIT)) {
+ *gicc_base = GICC_BASE;
+ *gicd_base = GICD_BASE;
+ } else {
+ *gicc_base = GICC_BASE_64K;
+ *gicd_base = GICD_BASE_64K;
+ }
+ } else {
+ *gicc_base = GICC_BASE;
+ *gicd_base = GICD_BASE;
+ }
+}
--- /dev/null
+#
+# Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+# indicate the reset vector address can be programmed
+PROGRAMMABLE_RESET_ADDRESS := 1
+USE_COHERENT_MEM := 0
+RESET_TO_BL31 := 0
+ENABLE_STACK_PROTECTOR := 0
+LS1043_GIC_SOURCES := drivers/arm/gic/common/gic_common.c \
+ drivers/arm/gic/v2/gicv2_main.c \
+ drivers/arm/gic/v2/gicv2_helpers.c \
+ plat/common/plat_gicv2.c \
+ plat/layerscape/board/ls1043/ls_gic.c
+
+
+LS1043_INTERCONNECT_SOURCES := drivers/arm/cci/cci.c
+
+LS1043_SECURITY_SOURCES := plat/layerscape/common/ls_tzc380.c \
+ plat/layerscape/board/ls1043/ls1043_security.c
+
+PLAT_INCLUDES := -Iplat/layerscape/board/ls1043/include \
+ -Iinclude/plat/arm/common \
+ -Iplat/layerscape/common/include \
+ -Iinclude/drivers/arm \
+ -Iinclude/lib \
+ -Iinclude/drivers/io
+
+
+PLAT_BL_COMMON_SOURCES := drivers/console/aarch64/console.S \
+ plat/layerscape/common/aarch64/ls_console.S
+
+LS1043_CPU_LIBS := lib/cpus/${ARCH}/aem_generic.S
+
+LS1043_CPU_LIBS += lib/cpus/aarch64/cortex_a53.S
+
+BL1_SOURCES += plat/layerscape/board/ls1043/ls1043_bl1_setup.c \
+ plat/layerscape/board/ls1043/ls1043_err.c \
+ drivers/delay_timer/delay_timer.c \
+
+BL1_SOURCES += plat/layerscape/board/ls1043/${ARCH}/ls1043_helpers.S \
+ ${LS1043_CPU_LIBS} \
+ ${LS1043_INTERCONNECT_SOURCES} \
+ $(LS1043_SECURITY_SOURCES)
+
+
+BL2_SOURCES += drivers/delay_timer/delay_timer.c \
+ plat/layerscape/board/ls1043/ls1043_bl2_setup.c \
+ plat/layerscape/board/ls1043/ls1043_err.c \
+ ${LS1043_SECURITY_SOURCES}
+
+
+BL31_SOURCES += plat/layerscape/board/ls1043/ls1043_bl31_setup.c \
+ plat/layerscape/board/ls1043/ls1043_topology.c \
+ plat/layerscape/board/ls1043/aarch64/ls1043_helpers.S \
+ plat/layerscape/board/ls1043/ls1043_psci.c \
+ drivers/delay_timer/delay_timer.c \
+ ${LS1043_CPU_LIBS} \
+ ${LS1043_GIC_SOURCES} \
+ ${LS1043_INTERCONNECT_SOURCES} \
+ ${LS1043_SECURITY_SOURCES}
+
+# Disable the PSCI platform compatibility layer
+ENABLE_PLAT_COMPAT := 0
+MULTI_CONSOLE_API := 1
+
+# Enable workarounds for selected Cortex-A53 erratas.
+ERRATA_A53_855873 := 1
+
+ifneq (${ENABLE_STACK_PROTECTOR},0)
+PLAT_BL_COMMON_SOURCES += plat/layerscape/board/ls1043/ls1043_stack_protector.c
+endif
+
+ifeq (${ARCH},aarch32)
+ NEED_BL32 := yes
+endif
+
+include plat/layerscape/common/ls_common.mk
--- /dev/null
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include "plat_ls.h"
+
+void tsp_early_platform_setup(void)
+{
+ ls_tsp_early_platform_setup();
+
+ /*Todo: Initialize the platform config for future decision making */
+}
--- /dev/null
+#
+# Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+# TSP source files specific to FVP platform
+BL32_SOURCES += plat/layerscape/board/ls1043/ls1043_topology.c \
+ plat/layerscape/board/ls1043/tsp/ls1043_tsp_setup.c \
+ ${LS1043_GIC_SOURCES}
+
+include plat/layerscape/common/tsp/ls_tsp.mk
--- /dev/null
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <bl_common.h>
+#include <desc_image_load.h>
+#include <platform.h>
+#include <platform_def.h>
+#include <debug.h>
+#include <ls_def.h>
+
+/*******************************************************************************
+ * Following descriptor provides BL image/ep information that gets used
+ * by BL2 to load the images and also subset of this information is
+ * passed to next BL image. The image loading sequence is managed by
+ * populating the images in required loading order. The image execution
+ * sequence is managed by populating the `next_handoff_image_id` with
+ * the next executable image id.
+ ******************************************************************************/
+static bl_mem_params_node_t bl2_mem_params_descs[] = {
+#ifdef EL3_PAYLOAD_BASE
+ /* Fill EL3 payload related information (BL31 is EL3 payload)*/
+ {
+ .image_id = BL31_IMAGE_ID,
+
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+ VERSION_2, entry_point_info_t,
+ SECURE | EXECUTABLE | EP_FIRST_EXE),
+ .ep_info.pc = EL3_PAYLOAD_BASE,
+ .ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
+ DISABLE_ALL_EXCEPTIONS),
+
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t,
+ IMAGE_ATTRIB_PLAT_SETUP |
+ IMAGE_ATTRIB_SKIP_LOADING),
+
+ .next_handoff_image_id = INVALID_IMAGE_ID,
+ },
+
+#else /* EL3_PAYLOAD_BASE */
+
+ /* Fill BL31 related information */
+ {
+ .image_id = BL31_IMAGE_ID,
+
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+ VERSION_2, entry_point_info_t,
+ SECURE | EXECUTABLE | EP_FIRST_EXE),
+ .ep_info.pc = BL31_BASE,
+ .ep_info.spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
+ DISABLE_ALL_EXCEPTIONS),
+#if DEBUG
+ .ep_info.args.arg1 = LS_BL31_PLAT_PARAM_VAL,
+#endif
+
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t, IMAGE_ATTRIB_PLAT_SETUP),
+ .image_info.image_base = BL31_BASE,
+ .image_info.image_max_size = (BL31_LIMIT - BL31_BASE),
+
+# ifdef BL32_BASE
+ .next_handoff_image_id = BL32_IMAGE_ID,
+# else
+ .next_handoff_image_id = BL33_IMAGE_ID,
+# endif
+ },
+# ifdef BL32_BASE
+ /* Fill BL32 related information */
+ {
+ .image_id = BL32_IMAGE_ID,
+
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+ VERSION_2, entry_point_info_t, SECURE | EXECUTABLE),
+ .ep_info.pc = BL32_BASE,
+
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t, 0),
+ .image_info.image_base = BL32_BASE,
+ .image_info.image_max_size = (BL32_LIMIT - BL32_BASE),
+
+ .next_handoff_image_id = BL33_IMAGE_ID,
+ },
+# endif /* BL32_BASE */
+
+ /* Fill BL33 related information */
+ {
+ .image_id = BL33_IMAGE_ID,
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+ VERSION_2, entry_point_info_t, NON_SECURE | EXECUTABLE),
+# ifdef PRELOADED_BL33_BASE
+ .ep_info.pc = PRELOADED_BL33_BASE,
+
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t,
+ IMAGE_ATTRIB_SKIP_LOADING),
+# else
+ .ep_info.pc = BL33_BASE,
+
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t, 0),
+ .image_info.image_base = BL33_BASE,
+ .image_info.image_max_size = LS_NS_DRAM_SIZE,
+# endif /* PRELOADED_BL33_BASE */
+
+ .next_handoff_image_id = INVALID_IMAGE_ID,
+ }
+#endif /* EL3_PAYLOAD_BASE */
+};
+
+REGISTER_BL_IMAGE_DESCS(bl2_mem_params_descs)
--- /dev/null
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch.h>
+#include <asm_macros.S>
+#include <console_macros.S>
+#include <assert_macros.S>
+#include "ls_16550.h"
+
+ /*
+ * "core" functions are low-level implementations that don't require
+ * writable memory and are thus safe to call in BL1 crash context.
+ */
+ .globl console_ls_16550_core_init
+ .globl console_ls_16550_core_putc
+ .globl console_ls_16550_core_getc
+
+ .globl console_ls_16550_putc
+ .globl console_ls_16550_getc
+ .globl console_ls_16550_flush
+
+ /* -----------------------------------------------
+ * int console_ls_16550_core_init(uintptr_t base_addr,
+ * unsigned int uart_clk, unsigned int baud_rate)
+ * Function to initialize the console without a
+ * C Runtime to print debug information. This
+ * function will be accessed by console_init and
+ * crash reporting.
+ * In: x0 - console base address
+ * w1 - Uart clock in Hz
+ * w2 - Baud rate
+ * Out: return 1 on success, 0 on error
+ * Clobber list : x1, x2, x3
+ * -----------------------------------------------
+ */
+func console_ls_16550_core_init
+ /* Check the input base address */
+ cbz x0, init_fail
+ /* Check baud rate and uart clock for sanity */
+ cbz w1, init_fail
+ cbz w2, init_fail
+
+ /* Program the baudrate */
+ /* Divisor = Uart clock / (16 * baudrate) */
+ lsl w2, w2, #4
+ udiv w2, w1, w2
+ and w1, w2, #0xff /* w1 = DLL */
+ lsr w2, w2, #8
+ and w2, w2, #0xff /* w2 = DLLM */
+ ldrb w3, [x0, #UARTLCR]
+ orr w3, w3, #UARTLCR_DLAB
+ strb w3, [x0, #UARTLCR] /* enable DLL, DLLM programming */
+ strb w1, [x0, #UARTDLL] /* program DLL */
+ strb w2, [x0, #UARTDLLM] /* program DLLM */
+ mov w2, #~UARTLCR_DLAB
+ and w3, w3, w2
+ strb w3, [x0, #UARTLCR] /* disable DLL, DLLM programming */
+
+ /* 8n1 */
+ mov w3, #3
+ strb w3, [x0, #UARTLCR]
+ /* no interrupt */
+ mov w3, #0
+ strb w3, [x0, #UARTIER]
+ /* enable fifo, DMA */
+ mov w3, #(UARTFCR_FIFOEN |UARTFCR_TXCLR | UARTFCR_RXCLR)
+ strb w3, [x0, #UARTFCR]
+ /* DTR + RTS */
+ mov w3, #3
+ str w3, [x0, #UARTMCR]
+ mov w0, #1
+ ret
+init_fail:
+ mov w0, #0
+ ret
+endfunc console_ls_16550_core_init
+
+#if MULTI_CONSOLE_API
+ .globl console_ls_16550_register
+
+ /* -----------------------------------------------
+ * int console_ls_16550_register(console_ls_16550_t *console,
+ * uintptr_t base, uint32_t clk, uint32_t baud)
+ * Function to initialize and register a new 16550
+ * console. Storage passed in for the console struct
+ * *must* be persistent (i.e. not from the stack).
+ * In: x0 - UART register base address
+ * w1 - UART clock in Hz
+ * w2 - Baud rate
+ * x3 - pointer to empty console_ls_16550_t struct
+ * Out: return 1 on success, 0 on error
+ * Clobber list : x0, x1, x2, x6, x7, x14
+ * -----------------------------------------------
+ */
+func console_ls_16550_register
+ mov x7, x30
+ mov x6, x3
+ cbz x6, register_fail
+ str x0, [x6, #CONSOLE_T_16550_BASE]
+
+ bl console_ls_16550_core_init
+ cbz x0, register_fail
+
+ mov x0, x6
+ mov x30, x7
+ finish_console_register ls_16550
+
+register_fail:
+ ret x7
+endfunc console_ls_16550_register
+#else
+ .globl console_core_init
+ .globl console_core_putc
+ .globl console_core_getc
+ .globl console_core_flush
+ .equ console_core_init,console_ls_16550_core_init
+ .equ console_core_putc,console_ls_16550_core_putc
+ .equ console_core_getc,console_ls_16550_core_getc
+ .equ console_core_flush,console_ls_16550_core_flush
+#endif
+
+ /* --------------------------------------------------------
+ * int console_ls_16550_core_putc(int c, uintptr_t base_addr)
+ * Function to output a character over the console. It
+ * returns the character printed on success or -1 on error.
+ * In : w0 - character to be printed
+ * x1 - console base address
+ * Out : return -1 on error else return character.
+ * Clobber list : x2
+ * --------------------------------------------------------
+ */
+func console_ls_16550_core_putc
+#if ENABLE_ASSERTIONS
+ cmp x1, #0
+ ASM_ASSERT(ne)
+#endif /* ENABLE_ASSERTIONS */
+
+ /* Prepend '\r' to '\n' */
+ cmp w0, #0xA //'\n'
+ b.ne 2f
+ /* Check if the transmit FIFO is full */
+1: ldrb w2, [x1, #UARTLSR]
+ and w2, w2, #UARTLSR_THRE /* #(UARTLSR_TEMT | UARTLSR_THRE)*/
+ cmp w2, #(UARTLSR_THRE)
+ b.ne 1b
+ mov w2, #0xD /* '\r' */
+ strb w2, [x1, #UARTTX]
+ ldrb w2, [x1, #UARTFCR]
+ orr w2, w2, #UARTFCR_TXCLR
+
+ /* Check if the transmit FIFO is full */
+2: ldrb w2, [x1, #UARTLSR]
+ and w2, w2, #(UARTLSR_THRE)
+ cmp w2, #(UARTLSR_THRE)
+ b.ne 2b
+ strb w0, [x1, #UARTTX]
+ ret
+endfunc console_ls_16550_core_putc
+
+ /* --------------------------------------------------------
+ * int console_16550_putc(int c, console_ls_16550_t *console)
+ * Function to output a character over the console. It
+ * returns the character printed on success or -1 on error.
+ * In : w0 - character to be printed
+ * x1 - pointer to console_t structure
+ * Out : return -1 on error else return character.
+ * Clobber list : x2
+ * --------------------------------------------------------
+ */
+func console_ls_16550_putc
+#if ENABLE_ASSERTIONS
+ cmp x1, #0
+ ASM_ASSERT(ne)
+#endif /* ENABLE_ASSERTIONS */
+ ldr x1, [x1, #CONSOLE_T_16550_BASE]
+ b console_ls_16550_core_putc
+endfunc console_ls_16550_putc
+
+ /* ---------------------------------------------
+ * int console_ls_16550_core_getc(uintptr_t base_addr)
+ * Function to get a character from the console.
+ * It returns the character grabbed on success
+ * or -1 on if no character is available.
+ * In : x0 - console base address
+ * Out : w0 - character if available, else -1
+ * Clobber list : x0, x1
+ * ---------------------------------------------
+ */
+func console_ls_16550_core_getc
+#if ENABLE_ASSERTIONS
+ cmp x0, #0
+ ASM_ASSERT(ne)
+#endif /* ENABLE_ASSERTIONS */
+
+ /* Check if the receive FIFO is empty */
+1: ldrb w1, [x0, #UARTLSR]
+ tbz w1, #UARTLSR_RDR, 1b
+ ldrb w0, [x0, #UARTRX]
+ ret
+no_char:
+ mov w0, #ERROR_NO_PENDING_CHAR
+ ret
+endfunc console_ls_16550_core_getc
+
+ /* ---------------------------------------------
+ * int console_ls_16550_getc(console_ls_16550_t *console)
+ * Function to get a character from the console.
+ * It returns the character grabbed on success
+ * or -1 on if no character is available.
+ * In : x0 - pointer to console_t structure
+ * Out : w0 - character if available, else -1
+ * Clobber list : x0, x1
+ * ---------------------------------------------
+ */
+func console_ls_16550_getc
+#if ENABLE_ASSERTIONS
+ cmp x1, #0
+ ASM_ASSERT(ne)
+#endif /* ENABLE_ASSERTIONS */
+ ldr x0, [x0, #CONSOLE_T_16550_BASE]
+ b console_ls_16550_core_getc
+endfunc console_ls_16550_getc
+
+ /* ---------------------------------------------
+ * int console_ls_16550_core_flush(uintptr_t base_addr)
+ * Function to force a write of all buffered
+ * data that hasn't been output.
+ * In : x0 - console base address
+ * Out : return -1 on error else return 0.
+ * Clobber list : x0, x1
+ * ---------------------------------------------
+ */
+func console_ls_16550_core_flush
+#if ENABLE_ASSERTIONS
+ cmp x0, #0
+ ASM_ASSERT(ne)
+#endif /* ENABLE_ASSERTIONS */
+
+ /* Loop until the transmit FIFO is empty */
+1: ldrb w1, [x0, #UARTLSR]
+ and w1, w1, #(UARTLSR_TEMT | UARTLSR_THRE)
+ cmp w1, #(UARTLSR_TEMT | UARTLSR_THRE)
+ b.ne 1b
+
+ mov w0, #0
+ ret
+endfunc console_ls_16550_core_flush
+
+ /* ---------------------------------------------
+ * int console_ls_16550_flush(console_ls_16550_t *console)
+ * Function to force a write of all buffered
+ * data that hasn't been output.
+ * In : x0 - pointer to console_t structure
+ * Out : return -1 on error else return 0.
+ * Clobber list : x0, x1
+ * ---------------------------------------------
+ */
+func console_ls_16550_flush
+#if ENABLE_ASSERTIONS
+ cmp x0, #0
+ ASM_ASSERT(ne)
+#endif /* ENABLE_ASSERTIONS */
+ ldr x0, [x0, #CONSOLE_T_16550_BASE]
+ b console_ls_16550_core_flush
+endfunc console_ls_16550_flush
--- /dev/null
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <asm_macros.S>
+#include <console.h>
+#include <platform_def.h>
+
+ .weak plat_my_core_pos
+ .globl plat_crash_console_init
+ .globl plat_crash_console_putc
+ .globl plat_crash_console_flush
+ .weak platform_mem_init
+ .globl plat_ls_calc_core_pos
+
+
+ /* -----------------------------------------------------
+ * unsigned int plat_my_core_pos(void)
+ * This function uses the plat_ls_calc_core_pos()
+ * definition to get the index of the calling CPU.
+ * -----------------------------------------------------
+ */
+func plat_my_core_pos
+ mrs x0, mpidr_el1
+ b plat_ls_calc_core_pos
+endfunc plat_my_core_pos
+
+ /* -----------------------------------------------------
+ * unsigned int plat_ls_calc_core_pos(u_register_t mpidr)
+ * Helper function to calculate the core position.
+ * With this function: CorePos = (ClusterId * 4) +
+ * CoreId
+ * -----------------------------------------------------
+ */
+func plat_ls_calc_core_pos
+ and x1, x0, #MPIDR_CPU_MASK
+ and x0, x0, #MPIDR_CLUSTER_MASK
+ add x0, x1, x0, LSR #6
+ ret
+endfunc plat_ls_calc_core_pos
+
+ /* ---------------------------------------------
+ * int plat_crash_console_init(void)
+ * Function to initialize the crash console
+ * without a C Runtime to print crash report.
+ * Clobber list : x0 - x4
+ * ---------------------------------------------
+ */
+
+#if MULTI_CONSOLE_API
+ /* -----------------------------------------------------
+ * int plat_crash_console_init(void)
+ * Use normal console by default. Switch it to crash
+ * mode so serial consoles become active again.
+ * NOTE: This default implementation will only work for
+ * crashes that occur after a normal console (marked
+ * valid for the crash state) has been registered with
+ * the console framework. To debug crashes that occur
+ * earlier, the platform has to override these functions
+ * with an implementation that initializes a console
+ * driver with hardcoded parameters. See
+ * docs/porting-guide.rst for more information.
+ * -----------------------------------------------------
+ */
+func plat_crash_console_init
+#if defined(IMAGE_BL1)
+ /*
+ * BL1 code can possibly crash so early that the data segment is not yet
+ * accessible. Don't risk undefined behavior by trying to run the normal
+ * console framework. Platforms that want to debug BL1 will need to
+ * override this with custom functions that can run from registers only.
+ */
+ mov x0, #0
+ ret
+#else /* IMAGE_BL1 */
+ mov x3, x30
+ mov x0, #CONSOLE_FLAG_CRASH
+ bl console_switch_state
+ mov x0, #1
+ ret x3
+#endif
+endfunc plat_crash_console_init
+
+ /* -----------------------------------------------------
+ * void plat_crash_console_putc(int character)
+ * Output through the normal console by default.
+ * -----------------------------------------------------
+ */
+func plat_crash_console_putc
+ b console_putc
+endfunc plat_crash_console_putc
+
+ /* -----------------------------------------------------
+ * void plat_crash_console_flush(void)
+ * Flush normal console by default.
+ * -----------------------------------------------------
+ */
+func plat_crash_console_flush
+ b console_flush
+endfunc plat_crash_console_flush
+
+#else /* MULTI_CONSOLE_API */
+
+ /* -----------------------------------------------------
+ * In the old API these are all no-op stubs that need to
+ * be overridden by the platform to be useful.
+ * -----------------------------------------------------
+ */
+func plat_crash_console_init
+ mov_imm x0, PLAT_LS1043_UART_BASE
+ mov_imm x1, PLAT_LS1043_UART_CLOCK
+ mov_imm x2, PLAT_LS1043_UART_BAUDRATE
+ b console_core_init
+endfunc plat_crash_console_init
+
+ /* ---------------------------------------------
+ * int plat_crash_console_putc(int c)
+ * Function to print a character on the crash
+ * console without a C Runtime.
+ * Clobber list : x1, x2
+ * ---------------------------------------------
+ */
+func plat_crash_console_putc
+ mov_imm x1, PLAT_LS1043_UART_BASE
+ b console_core_putc
+endfunc plat_crash_console_putc
+
+ /* ---------------------------------------------
+ * int plat_crash_console_flush()
+ * Function to force a write of all buffered
+ * data that hasn't been output.
+ * Out : return -1 on error else return 0.
+ * Clobber list : r0 - r1
+ * ---------------------------------------------
+ */
+func plat_crash_console_flush
+ mov_imm x1, PLAT_LS1043_UART_BASE
+ b console_core_flush
+endfunc plat_crash_console_flush
+#endif
+ /* ---------------------------------------------------------------------
+ * We don't need to carry out any memory initialization on LS
+ * platforms. The Secure SRAM is accessible straight away.
+ * ---------------------------------------------------------------------
+ */
+func platform_mem_init
+ ret
+endfunc platform_mem_init
--- /dev/null
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef __FSL_CSU_H__
+#define __FSL_CSU_H__
+
+enum csu_cslx_access {
+ CSU_NS_SUP_R = 0x08,
+ CSU_NS_SUP_W = 0x80,
+ CSU_NS_SUP_RW = 0x88,
+ CSU_NS_USER_R = 0x04,
+ CSU_NS_USER_W = 0x40,
+ CSU_NS_USER_RW = 0x44,
+ CSU_S_SUP_R = 0x02,
+ CSU_S_SUP_W = 0x20,
+ CSU_S_SUP_RW = 0x22,
+ CSU_S_USER_R = 0x01,
+ CSU_S_USER_W = 0x10,
+ CSU_S_USER_RW = 0x11,
+ CSU_ALL_RW = 0xff,
+};
+
+struct csu_ns_dev {
+ uintptr_t ind;
+ uint32_t val;
+};
+
+void enable_layerscape_ns_access(void);
+
+#endif
--- /dev/null
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef __LS_16550_H__
+#define __LS_16550_H__
+
+#include <console.h>
+
+/* UART16550 Registers */
+#define UARTTX 0x0
+#define UARTRX 0x0
+#define UARTDLL 0x0
+#define UARTIER 0x1
+#define UARTDLLM 0x1
+#define UARTFCR 0x2
+#define UARTLCR 0x3
+#define UARTLSR 0x5
+#define UARTMCR 0x4
+
+/* FIFO Control Register bits */
+#define UARTFCR_FIFOMD_16450 (0 << 6)
+#define UARTFCR_FIFOMD_16550 (1 << 6)
+#define UARTFCR_RXTRIG_1 (0 << 6)
+#define UARTFCR_RXTRIG_4 (1 << 6)
+#define UARTFCR_RXTRIG_8 (2 << 6)
+#define UARTFCR_RXTRIG_16 (3 << 6)
+#define UARTFCR_TXTRIG_1 (0 << 4)
+#define UARTFCR_TXTRIG_4 (1 << 4)
+#define UARTFCR_TXTRIG_8 (2 << 4)
+#define UARTFCR_TXTRIG_16 (3 << 4)
+#define UARTFCR_DMAEN (1 << 3) /* Enable DMA mode */
+#define UARTFCR_TXCLR (1 << 2) /* Clear contents of Tx FIFO */
+#define UARTFCR_RXCLR (1 << 1) /* Clear contents of Rx FIFO */
+#define UARTFCR_FIFOEN (1 << 0) /* Enable the Tx/Rx FIFO */
+#define UARTFCR_64FIFO (1 << 5)
+
+/* Line Control Register bits */
+#define UARTLCR_DLAB (1 << 7) /* Divisor Latch Access */
+#define UARTLCR_SETB (1 << 6) /* Set BREAK Condition */
+#define UARTLCR_SETP (1 << 5) /* Set Parity to LCR[4] */
+#define UARTLCR_EVEN (1 << 4) /* Even Parity Format */
+#define UARTLCR_PAR (1 << 3) /* Parity */
+#define UARTLCR_STOP (1 << 2) /* Stop Bit */
+#define UARTLCR_WORDSZ_5 0 /* Word Length of 5 */
+#define UARTLCR_WORDSZ_6 1 /* Word Length of 6 */
+#define UARTLCR_WORDSZ_7 2 /* Word Length of 7 */
+#define UARTLCR_WORDSZ_8 3 /* Word Length of 8 */
+
+/* Line Status Register bits */
+#define UARTLSR_RXFIFOEMT (1 << 9) /* Rx Fifo Empty */
+#define UARTLSR_TXFIFOFULL (1 << 8) /* Tx Fifo Full */
+#define UARTLSR_RXFIFOERR (1 << 7) /* Rx Fifo Error */
+#define UARTLSR_TEMT (1 << 6) /* Tx Shift Register Empty */
+#define UARTLSR_THRE (1 << 5) /* Tx Holding Register Empty */
+#define UARTLSR_BRK (1 << 4) /* Break Condition Detected */
+#define UARTLSR_FERR (1 << 3) /* Framing Error */
+#define UARTLSR_PERR (1 << 3) /* Parity Error */
+#define UARTLSR_OVRF (1 << 2) /* Rx Overrun Error */
+#define UARTLSR_RDR (1 << 2) /* Rx Data Ready */
+
+#define CONSOLE_T_16550_BASE CONSOLE_T_DRVDATA
+
+#ifndef __ASSEMBLY__
+
+#include <types.h>
+
+typedef struct {
+ console_t console;
+ uintptr_t base;
+} console_ls_16550_t;
+
+/*
+ * Initialize a new 16550 console instance and register it with the console
+ * framework. The |console| pointer must point to storage that will be valid
+ * for the lifetime of the console, such as a global or static local variable.
+ * Its contents will be reinitialized from scratch.
+ */
+int console_ls_16550_register(uintptr_t baseaddr, uint32_t clock, uint32_t baud,
+ console_ls_16550_t *console);
+
+#endif /*__ASSEMBLY__*/
+
+#endif /* __LS_16550_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef __PLAT_LS_H__
+#define __PLAT_LS_H__
+
+#include <sys/types.h>
+#include <cpu_data.h>
+
+/* BL1 utility functions */
+void ls_bl1_platform_setup(void);
+void ls_bl1_early_platform_setup(void);
+
+/* BL2 utility functions */
+void ls_bl2_early_platform_setup(meminfo_t *mem_layout);
+uint32_t ls_get_spsr_for_bl32_entry(void);
+uint32_t ls_get_spsr_for_bl33_entry(void);
+
+/* BL3 utility functions */
+void ls_bl31_early_platform_setup(void *from_bl2,
+ void *plat_params_from_bl2);
+
+/* IO storage utility functions */
+void plat_ls_io_setup(void);
+
+
+void ls_setup_page_tables(uintptr_t total_base,
+ size_t total_size,
+ uintptr_t code_start,
+ uintptr_t code_limit,
+ uintptr_t rodata_start,
+ uintptr_t rodata_limit
+#if USE_COHERENT_MEM
+ , uintptr_t coh_start,
+ uintptr_t coh_limit
+#endif
+);
+
+/* PSCI utility functions */
+int ls_check_mpidr(u_register_t mpidr);
+
+/* Security utility functions */
+int tzc380_setup(void);
+
+/* Timer utility functions */
+uint64_t ls_get_timer(uint64_t start);
+void ls_delay_timer_init(void);
+
+/* TSP utility functions */
+void ls_tsp_early_platform_setup(void);
+
+/* Helper functions */
+unsigned int plat_ls_calc_core_pos(u_register_t mpidr);
+
+/* others */
+unsigned int plat_ls_get_cluster_core_count(u_register_t mpidr);
+
+#endif /* __PLAT_LS_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef __LAYERSCAPE_SOC_H__
+#define __LAYERSCAPE_SOC_H__
+
+#include <stdint.h>
+
+#define SVR_WO_E 0xFFFFFE
+#define SVR_LS1043A 0x879204
+#define SVR_LS1043AE 0x879200
+
+void get_gic_offset(uint32_t *gicc_base, uint32_t *gicd_base);
+
+#endif /* __LAYERSCAPE_SOC_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef __TZC380_H__
+#define __TZC380_H__
+
+struct tzc380_reg {
+ unsigned int secure;
+ unsigned int enabled;
+ unsigned int low_addr;
+ unsigned int high_addr;
+ unsigned int size;
+ unsigned int sub_mask;
+};
+
+#endif /* __TZC380_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <debug.h>
+#include "ls_16550.h"
+#include "plat_ls.h"
+#include "../../../bl1/bl1_private.h"
+
+/* Data structure which holds the extents of the trusted SRAM for BL1*/
+static meminfo_t bl1_tzram_layout;
+
+meminfo_t *bl1_plat_sec_mem_layout(void)
+{
+ return &bl1_tzram_layout;
+}
+
+/*******************************************************************************
+ * BL1 specific platform actions shared between ARM standard platforms.
+ ******************************************************************************/
+void ls_bl1_early_platform_setup(void)
+{
+ static console_ls_16550_t console;
+
+#if !LS1043_DISABLE_TRUSTED_WDOG
+ /* TODO: Enable watchdog */
+
+#endif
+
+ /* Initialize the console to provide early debug support */
+ console_ls_16550_register(LS_TF_UART_BASE, LS_TF_UART_CLOCK,
+ LS_TF_UART_BAUDRATE, &console);
+
+ /* Allow BL1 to see the whole Trusted RAM */
+ bl1_tzram_layout.total_base = LS_SRAM_BASE;
+ bl1_tzram_layout.total_size = LS_SRAM_SIZE;
+}
+
+/******************************************************************************
+ * Perform the very early platform specific architecture setup shared between
+ * ARM standard platforms. This only does basic initialization. Later
+ * architectural setup (bl1_arch_setup()) does not do anything platform
+ * specific.
+ *****************************************************************************/
+void ls_bl1_plat_arch_setup(void)
+{
+ ls_setup_page_tables(bl1_tzram_layout.total_base,
+ bl1_tzram_layout.total_size,
+ BL_CODE_BASE,
+ BL1_CODE_END,
+ BL1_RO_DATA_BASE,
+ BL1_RO_DATA_END
+#if USE_COHERENT_MEM
+ , BL_COHERENT_RAM_BASE,
+ BL_COHERENT_RAM_END
+#endif
+ );
+ VERBOSE("After setup the page tables\n");
+#ifdef AARCH32
+ enable_mmu_secure(0);
+#else
+ enable_mmu_el3(0);
+#endif /* AARCH32 */
+ VERBOSE("After MMU enabled\n");
+}
+
+void bl1_plat_arch_setup(void)
+{
+ ls_bl1_plat_arch_setup();
+}
+
+/*
+ * Perform the platform specific architecture setup shared between
+ * ARM standard platforms.
+ */
+void ls_bl1_platform_setup(void)
+{
+ /* Initialise the IO layer and register platform IO devices */
+ plat_ls_io_setup();
+}
+
+void bl1_plat_prepare_exit(entry_point_info_t *ep_info)
+{
+#if !LS1043_DISABLE_TRUSTED_WDOG
+ /*TODO: Disable watchdog before leaving BL1 */
+#endif
+}
--- /dev/null
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <bl_common.h>
+#include <desc_image_load.h>
+#include "ls_16550.h"
+#include "plat_ls.h"
+#include "ls_def.h"
+
+/* Data structure which holds the extents of the trusted SRAM for BL2 */
+static meminfo_t bl2_tzram_layout __aligned(CACHE_WRITEBACK_GRANULE);
+
+/*******************************************************************************
+ * BL1 has passed the extents of the trusted SRAM that should be visible to BL2
+ * in x0. This memory layout is sitting at the base of the free trusted SRAM.
+ * Copy it to a safe location before its reclaimed by later BL2 functionality.
+ ******************************************************************************/
+void ls_bl2_early_platform_setup(meminfo_t *mem_layout)
+{
+ static console_ls_16550_t console;
+
+ /* Initialize the console to provide early debug support */
+ console_ls_16550_register(LS_TF_UART_BASE, LS_TF_UART_CLOCK,
+ LS_TF_UART_BAUDRATE, &console);
+
+ /* Setup the BL2 memory layout */
+ bl2_tzram_layout = *mem_layout;
+
+ /* Initialise the IO layer and register platform IO devices */
+ plat_ls_io_setup();
+}
+
+/*******************************************************************************
+ * Perform the very early platform specific architectural setup here. At the
+ * moment this is only initializes the mmu in a quick and dirty way.
+ ******************************************************************************/
+void ls_bl2_plat_arch_setup(void)
+{
+ ls_setup_page_tables(bl2_tzram_layout.total_base,
+ bl2_tzram_layout.total_size,
+ BL_CODE_BASE,
+ BL_CODE_END,
+ BL_RO_DATA_BASE,
+ BL_RO_DATA_END
+#if USE_COHERENT_MEM
+ , BL_COHERENT_RAM_BASE,
+ BL_COHERENT_RAM_END
+#endif
+ );
+
+#ifdef AARCH32
+ enable_mmu_secure(0);
+#else
+ enable_mmu_el1(0);
+#endif
+}
+
+void bl2_plat_arch_setup(void)
+{
+ ls_bl2_plat_arch_setup();
+}
+
+int ls_bl2_handle_post_image_load(unsigned int image_id)
+{
+ int err = 0;
+ bl_mem_params_node_t *bl_mem_params = get_bl_mem_params_node(image_id);
+
+ assert(bl_mem_params);
+
+ switch (image_id) {
+#ifdef AARCH64
+ case BL32_IMAGE_ID:
+ bl_mem_params->ep_info.spsr = ls_get_spsr_for_bl32_entry();
+ break;
+#endif
+
+ case BL33_IMAGE_ID:
+ /* BL33 expects to receive the primary CPU MPID (through r0) */
+ bl_mem_params->ep_info.args.arg0 = 0xffff & read_mpidr();
+ bl_mem_params->ep_info.spsr = ls_get_spsr_for_bl33_entry();
+ break;
+ }
+
+ return err;
+}
+
+/*******************************************************************************
+ * This function can be used by the platforms to update/use image
+ * information for given `image_id`.
+ ******************************************************************************/
+int bl2_plat_handle_post_image_load(unsigned int image_id)
+{
+ return ls_bl2_handle_post_image_load(image_id);
+}
--- /dev/null
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <console.h>
+#include <mmio.h>
+#include <gicv2.h>
+#include "ls_16550.h"
+#include "plat_ls.h"
+#include "soc.h"
+
+#define BL31_END (uintptr_t)(&__BL31_END__)
+
+/*
+ * Placeholder variables for copying the arguments that have been passed to
+ * BL31 from BL2.
+ */
+static entry_point_info_t bl32_image_ep_info;
+static entry_point_info_t bl33_image_ep_info;
+
+const unsigned int g0_interrupt_array1[] = {
+ 9
+};
+
+gicv2_driver_data_t ls_gic_data = {
+ .gicd_base = GICD_BASE,
+ .gicc_base = GICC_BASE,
+ .g0_interrupt_num = ARRAY_SIZE(g0_interrupt_array1),
+ .g0_interrupt_array = g0_interrupt_array1,
+};
+
+
+/*******************************************************************************
+ * Return a pointer to the 'entry_point_info' structure of the next image for the
+ * security state specified. BL33 corresponds to the non-secure image type
+ * while BL32 corresponds to the secure image type. A NULL pointer is returned
+ * if the image does not exist.
+ ******************************************************************************/
+entry_point_info_t *bl31_plat_get_next_image_ep_info(uint32_t type)
+{
+ entry_point_info_t *next_image_info;
+
+ assert(sec_state_is_valid(type));
+ next_image_info = (type == NON_SECURE)
+ ? &bl33_image_ep_info : &bl32_image_ep_info;
+
+ if (next_image_info->pc)
+ return next_image_info;
+ else
+ return NULL;
+}
+
+/*******************************************************************************
+ * Perform any BL31 early platform setup common to Layerscape platforms.
+ * Here is an opportunity to copy parameters passed by the calling EL (S-EL1
+ * in BL2 & S-EL3 in BL1) before they are lost (potentially). This needs to be
+ * done before the MMU is initialized so that the memory layout can be used
+ * while creating page tables. BL2 has flushed this information to memory, so
+ * we are guaranteed to pick up good data.
+ ******************************************************************************/
+void ls_bl31_early_platform_setup(void *from_bl2,
+ void *plat_params_from_bl2)
+{
+ static console_ls_16550_t console;
+
+ /* Initialize the console to provide early debug support */
+ console_ls_16550_register(LS_TF_UART_BASE, LS_TF_UART_CLOCK,
+ LS_TF_UART_BAUDRATE, &console);
+#if RESET_TO_BL31
+ /* There are no parameters from BL2 if BL31 is a reset vector */
+ assert(from_bl2 == NULL);
+ assert(plat_params_from_bl2 == NULL);
+
+#ifdef BL32_BASE
+ /* Populate entry point information for BL32 */
+ SET_PARAM_HEAD(&bl32_image_ep_info,
+ PARAM_EP,
+ VERSION_1,
+ 0);
+ SET_SECURITY_STATE(bl32_image_ep_info.h.attr, SECURE);
+ bl32_image_ep_info.pc = BL32_BASE;
+ bl32_image_ep_info.spsr = ls_get_spsr_for_bl32_entry();
+#endif /* BL32_BASE */
+
+ /* Populate entry point information for BL33 */
+ SET_PARAM_HEAD(&bl33_image_ep_info,
+ PARAM_EP,
+ VERSION_1,
+ 0);
+ /*
+ * Tell BL31 where the non-trusted software image
+ * is located and the entry state information
+ */
+ bl33_image_ep_info.pc = plat_get_ns_image_entrypoint();
+
+ bl33_image_ep_info.spsr = ls_get_spsr_for_bl33_entry();
+ SET_SECURITY_STATE(bl33_image_ep_info.h.attr, NON_SECURE);
+
+#else /* RESET_TO_BL31 */
+
+ /*
+ * In debug builds, we pass a special value in 'plat_params_from_bl2'
+ * to verify platform parameters from BL2 to BL31.
+ * In release builds, it's not used.
+ */
+ assert(((unsigned long long)plat_params_from_bl2) ==
+ LS_BL31_PLAT_PARAM_VAL);
+
+ /*
+ * Check params passed from BL2 should not be NULL,
+ */
+ bl_params_t *params_from_bl2 = (bl_params_t *)from_bl2;
+
+ assert(params_from_bl2 != NULL);
+ assert(params_from_bl2->h.type == PARAM_BL_PARAMS);
+ assert(params_from_bl2->h.version >= VERSION_2);
+
+ bl_params_node_t *bl_params = params_from_bl2->head;
+
+ /*
+ * Copy BL33 and BL32 (if present), entry point information.
+ * They are stored in Secure RAM, in BL2's address space.
+ */
+ while (bl_params) {
+ if (bl_params->image_id == BL32_IMAGE_ID)
+ bl32_image_ep_info = *bl_params->ep_info;
+
+ if (bl_params->image_id == BL33_IMAGE_ID)
+ bl33_image_ep_info = *bl_params->ep_info;
+
+ bl_params = bl_params->next_params_info;
+ }
+
+ if (bl33_image_ep_info.pc == 0)
+ panic();
+
+#endif /* RESET_TO_BL31 */
+}
+
+/*******************************************************************************
+ * Perform any BL31 platform setup common to Layerscape platforms
+ ******************************************************************************/
+void ls_bl31_platform_setup(void)
+{
+ uint32_t gicc_base, gicd_base;
+
+ NOTICE(FIRMWARE_WELCOME_STR_LS1043_BL31);
+ /* Initialize the GIC driver, cpu and distributor interfaces */
+ get_gic_offset(&gicc_base, &gicd_base);
+ ls_gic_data.gicd_base = (uintptr_t)gicd_base;
+ ls_gic_data.gicc_base = (uintptr_t)gicc_base;
+ gicv2_driver_init(&ls_gic_data);
+ gicv2_distif_init();
+ gicv2_pcpu_distif_init();
+ gicv2_cpuif_enable();
+
+#if RESET_TO_BL31
+ /*
+ * Do initial security configuration to allow DRAM/device access
+ * (if earlier BL has not already done so).
+ */
+ plat_ls_security_setup();
+
+#endif /* RESET_TO_BL31 */
+
+ /* Enable and initialize the System level generic timer */
+ mmio_write_32(LS1043_SYS_CNTCTL_BASE + CNTCR_OFF,
+ CNTCR_FCREQ(0) | CNTCR_EN);
+
+ VERBOSE("Leave arm_bl31_platform_setup\n");
+}
+
+/*******************************************************************************
+ * Perform any BL31 platform runtime setup prior to BL31 exit common to Layerscape
+ * platforms
+ ******************************************************************************/
+void ls_bl31_plat_runtime_setup(void)
+{
+ static console_ls_16550_t console;
+
+ /* Initialize the runtime console */
+ console_ls_16550_register(PLAT_LS1043_UART_BASE, PLAT_LS1043_UART_CLOCK,
+ PLAT_LS1043_UART_BAUDRATE, &console);
+}
+
+void bl31_platform_setup(void)
+{
+ ls_bl31_platform_setup();
+}
+
+void bl31_plat_runtime_setup(void)
+{
+ ls_bl31_plat_runtime_setup();
+}
+
+/*******************************************************************************
+ * Perform the very early platform specific architectural setup shared between
+ * Layerscape platforms. This only does basic initialization. Later
+ * architectural setup (bl31_arch_setup()) does not do anything platform
+ * specific.
+ ******************************************************************************/
+void ls_bl31_plat_arch_setup(void)
+{
+ ls_setup_page_tables(BL31_BASE,
+ BL31_END - BL31_BASE,
+ BL_CODE_BASE,
+ BL_CODE_END,
+ BL_RO_DATA_BASE,
+ BL_RO_DATA_END
+#if USE_COHERENT_MEM
+ , BL_COHERENT_RAM_BASE,
+ BL_COHERENT_RAM_END
+#endif
+ );
+ enable_mmu_el3(0);
+}
+
+void bl31_plat_arch_setup(void)
+{
+ ls_bl31_plat_arch_setup();
+}
--- /dev/null
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+#include <arch.h>
+#include <arch_helpers.h>
+#include <xlat_tables_v2.h>
+#include <assert.h>
+#include <debug.h>
+#include <mmio.h>
+#include "platform_def.h"
+
+const mmap_region_t *plat_ls_get_mmap(void);
+
+/*
+ * Table of memory regions for various BL stages to map using the MMU.
+ * This doesn't include Trusted SRAM as ls_setup_page_tables() already
+ * takes care of mapping it.
+ *
+ * The flash needs to be mapped as writable in order to erase the FIP's Table of
+ * Contents in case of unrecoverable error (see plat_error_handler()).
+ */
+#ifdef IMAGE_BL1
+const mmap_region_t plat_ls_mmap[] = {
+ LS_MAP_FLASH0_RW,
+ LS_MAP_NS_DRAM,
+ LS_MAP_CCSR,
+ {0}
+};
+#endif
+#ifdef IMAGE_BL2
+const mmap_region_t plat_ls_mmap[] = {
+ LS_MAP_FLASH0_RW,
+ LS_MAP_CCSR,
+ LS_MAP_NS_DRAM,
+ LS_MAP_TSP_SEC_MEM,
+ {0}
+};
+#endif
+#ifdef IMAGE_BL31
+const mmap_region_t plat_ls_mmap[] = {
+ LS_MAP_CCSR,
+ LS_MAP_FLASH0_RW,
+ LS_MAP_NS_DRAM,
+ LS_MAP_TSP_SEC_MEM,
+ {0}
+};
+#endif
+#ifdef IMAGE_BL32
+const mmap_region_t plat_ls_mmap[] = {
+ LS_MAP_CCSR,
+ LS_MAP_FLASH0_RW,
+ LS_MAP_TSP_SEC_MEM,
+ {0}
+};
+#endif
+/*
+ * Set up the page tables for the generic and platform-specific memory regions.
+ * The extents of the generic memory regions are specified by the function
+ * arguments and consist of:
+ * - Trusted SRAM seen by the BL image;
+ * - Code section;
+ * - Read-only data section;
+ * - Coherent memory region, if applicable.
+ */
+void ls_setup_page_tables(uintptr_t total_base,
+ size_t total_size,
+ uintptr_t code_start,
+ uintptr_t code_limit,
+ uintptr_t rodata_start,
+ uintptr_t rodata_limit
+#if USE_COHERENT_MEM
+ ,
+ uintptr_t coh_start,
+ uintptr_t coh_limit
+#endif
+ )
+{
+ /* Now (re-)map the platform-specific memory regions */
+ mmap_add(plat_ls_get_mmap());
+ /*
+ * Map the Trusted SRAM with appropriate memory attributes.
+ * Subsequent mappings will adjust the attributes for specific regions.
+ */
+ VERBOSE("Trusted SRAM seen by this BL image: %p - %p\n",
+ (void *) total_base, (void *) (total_base + total_size));
+ mmap_add_region(total_base, total_base,
+ total_size,
+ MT_MEMORY | MT_RW | MT_SECURE);
+
+ /* Re-map the code section */
+ VERBOSE("Code region: %p - %p\n",
+ (void *) code_start, (void *) code_limit);
+ mmap_add_region(code_start, code_start,
+ code_limit - code_start,
+ MT_CODE | MT_SECURE);
+
+ /* Re-map the read-only data section */
+ VERBOSE("Read-only data region: %p - %p\n",
+ (void *) rodata_start, (void *) rodata_limit);
+ mmap_add_region(rodata_start, rodata_start,
+ rodata_limit - rodata_start,
+ MT_RO_DATA | MT_SECURE);
+
+#if USE_COHERENT_MEM
+ /* Re-map the coherent memory region */
+ VERBOSE("Coherent region: %p - %p\n",
+ (void *) coh_start, (void *) coh_limit);
+ mmap_add_region(coh_start, coh_start,
+ coh_limit - coh_start,
+ MT_DEVICE | MT_RW | MT_SECURE);
+#endif
+
+ /* Create the page tables to reflect the above mappings */
+ init_xlat_tables();
+}
+
+uintptr_t plat_get_ns_image_entrypoint(void)
+{
+#ifdef PRELOADED_BL33_BASE
+ return PRELOADED_BL33_BASE;
+#else
+ return LS_NS_DRAM_BASE;
+#endif
+}
+
+/*******************************************************************************
+ * Gets SPSR for BL32 entry
+ ******************************************************************************/
+uint32_t ls_get_spsr_for_bl32_entry(void)
+{
+ /*
+ * The Secure Payload Dispatcher service is responsible for
+ * setting the SPSR prior to entry into the BL32 image.
+ */
+ return 0;
+}
+
+/*******************************************************************************
+ * Gets SPSR for BL33 entry
+ ******************************************************************************/
+#ifndef AARCH32
+uint32_t ls_get_spsr_for_bl33_entry(void)
+{
+ unsigned int mode;
+ uint32_t spsr;
+
+ /* Figure out what mode we enter the non-secure world in */
+ mode = EL_IMPLEMENTED(2) ? MODE_EL2 : MODE_EL1;
+
+ /*
+ * TODO: Consider the possibility of specifying the SPSR in
+ * the FIP ToC and allowing the platform to have a say as
+ * well.
+ */
+ spsr = SPSR_64(mode, MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS);
+ return spsr;
+}
+#else
+/*******************************************************************************
+ * Gets SPSR for BL33 entry
+ ******************************************************************************/
+uint32_t ls_get_spsr_for_bl33_entry(void)
+{
+ unsigned int hyp_status, mode, spsr;
+
+ hyp_status = GET_VIRT_EXT(read_id_pfr1());
+
+ mode = (hyp_status) ? MODE32_hyp : MODE32_svc;
+
+ /*
+ * TODO: Consider the possibility of specifying the SPSR in
+ * the FIP ToC and allowing the platform to have a say as
+ * well.
+ */
+ spsr = SPSR_MODE32(mode, plat_get_ns_image_entrypoint() & 0x1,
+ SPSR_E_LITTLE, DISABLE_ALL_EXCEPTIONS);
+ return spsr;
+}
+#endif /* AARCH32 */
+
+/*******************************************************************************
+ * Returns Layerscape platform specific memory map regions.
+ ******************************************************************************/
+const mmap_region_t *plat_ls_get_mmap(void)
+{
+ return plat_ls_mmap;
+}
+
+
+unsigned int plat_get_syscnt_freq2(void)
+{
+ unsigned int counter_base_frequency;
+
+ counter_base_frequency = COUNTER_FREQUENCY;
+
+ return counter_base_frequency;
+}
--- /dev/null
+#
+# Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+
+# Process LS1043_DISABLE_TRUSTED_WDOG flag
+# TODO:Temparally disabled it on development phase, not implemented yet
+LS1043_DISABLE_TRUSTED_WDOG := 1
+
+# On Layerscape platforms, separate the code and read-only data sections to allow
+# mapping the former as executable and the latter as execute-never.
+SEPARATE_CODE_AND_RODATA := 1
+
+# Enable new version of image loading on Layerscape platforms
+LOAD_IMAGE_V2 := 1
+
+# Use generic OID definition (tbbr_oid.h)
+USE_TBBR_DEFS := 1
+
+
+COLD_BOOT_SINGLE_CPU := 1
+
+PLAT_INCLUDES += -Iinclude/common/tbbr
+
+PLAT_BL_COMMON_SOURCES += plat/layerscape/common/${ARCH}/ls_helpers.S \
+ plat/layerscape/common/ls_common.c
+
+include lib/xlat_tables_v2/xlat_tables.mk
+
+PLAT_BL_COMMON_SOURCES += ${XLAT_TABLES_LIB_SRCS}
+
+BL1_SOURCES += \
+ drivers/io/io_fip.c \
+ drivers/io/io_memmap.c \
+ drivers/io/io_storage.c \
+ plat/layerscape/common/ls_timer.c \
+ plat/layerscape/common/ls_bl1_setup.c \
+ plat/layerscape/common/ls_io_storage.c
+
+BL2_SOURCES += drivers/io/io_fip.c \
+ drivers/io/io_memmap.c \
+ drivers/io/io_storage.c \
+ plat/layerscape/common/ls_timer.c \
+ plat/layerscape/common/ls_bl2_setup.c \
+ plat/layerscape/common/ls_io_storage.c
+BL2_SOURCES += plat/layerscape/common/${ARCH}/ls_bl2_mem_params_desc.c
+BL2_SOURCES += plat/layerscape/common/ls_image_load.c \
+ common/desc_image_load.c
+
+BL31_SOURCES += plat/layerscape/common/ls_bl31_setup.c \
+ plat/layerscape/common/ls_timer.c \
+ plat/layerscape/common/ls_topology.c \
+ plat/layerscape/common/ns_access.c \
+ plat/common/plat_psci_common.c
+# Verify build config
+# -------------------
+
+ifneq (${LOAD_IMAGE_V2}, 1)
+ $(error Error: Layerscape needs LOAD_IMAGE_V2=1)
+endif
--- /dev/null
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <desc_image_load.h>
+#include "ls_def.h"
+
+/*******************************************************************************
+ * This function flushes the data structures so that they are visible
+ * in memory for the next BL image.
+ ******************************************************************************/
+void plat_flush_next_bl_params(void)
+{
+ flush_bl_params_desc();
+}
+
+/*******************************************************************************
+ * This function returns the list of loadable images.
+ ******************************************************************************/
+bl_load_info_t *plat_get_bl_image_load_info(void)
+{
+ return get_bl_load_info_from_mem_params_desc();
+}
+
+/*******************************************************************************
+ * This function returns the list of executable images.
+ ******************************************************************************/
+bl_params_t *plat_get_next_bl_params(void)
+{
+ return get_next_bl_params_from_mem_params_desc();
+}
--- /dev/null
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+#include <assert.h>
+#include <debug.h>
+#include <firmware_image_package.h>
+#include <io_driver.h>
+#include <io_fip.h>
+#include <io_memmap.h>
+#include <io_storage.h>
+#include "platform_def.h"
+
+/* IO devices */
+static const io_dev_connector_t *fip_dev_con;
+static uintptr_t fip_dev_handle;
+static const io_dev_connector_t *memmap_dev_con;
+static uintptr_t memmap_dev_handle;
+
+static const io_block_spec_t fip_block_spec = {
+ .offset = PLAT_LS_FIP_BASE,
+ .length = PLAT_LS_FIP_MAX_SIZE
+};
+
+static const io_uuid_spec_t bl2_uuid_spec = {
+ .uuid = UUID_TRUSTED_BOOT_FIRMWARE_BL2,
+};
+
+static const io_uuid_spec_t bl31_uuid_spec = {
+ .uuid = UUID_EL3_RUNTIME_FIRMWARE_BL31,
+};
+
+static const io_uuid_spec_t bl32_uuid_spec = {
+ .uuid = UUID_SECURE_PAYLOAD_BL32,
+};
+
+static const io_uuid_spec_t bl33_uuid_spec = {
+ .uuid = UUID_NON_TRUSTED_FIRMWARE_BL33,
+};
+
+static int open_fip(const uintptr_t spec);
+static int open_memmap(const uintptr_t spec);
+
+struct plat_io_policy {
+ uintptr_t *dev_handle;
+ uintptr_t image_spec;
+ int (*check)(const uintptr_t spec);
+};
+
+static const struct plat_io_policy policies[] = {
+ [FIP_IMAGE_ID] = {
+ &memmap_dev_handle,
+ (uintptr_t)&fip_block_spec,
+ open_memmap
+ },
+ [BL2_IMAGE_ID] = {
+ &fip_dev_handle,
+ (uintptr_t)&bl2_uuid_spec,
+ open_fip
+ },
+ [BL31_IMAGE_ID] = {
+ &fip_dev_handle,
+ (uintptr_t)&bl31_uuid_spec,
+ open_fip
+ },
+ [BL32_IMAGE_ID] = {
+ &fip_dev_handle,
+ (uintptr_t)&bl32_uuid_spec,
+ open_fip
+ },
+ [BL33_IMAGE_ID] = {
+ &fip_dev_handle,
+ (uintptr_t)&bl33_uuid_spec,
+ open_fip
+ },
+};
+
+static int open_fip(const uintptr_t spec)
+{
+ int result;
+ uintptr_t local_image_handle;
+
+ /* See if a Firmware Image Package is available */
+ result = io_dev_init(fip_dev_handle, (uintptr_t)FIP_IMAGE_ID);
+ if (result == 0) {
+ result = io_open(fip_dev_handle, spec, &local_image_handle);
+ if (result == 0) {
+ VERBOSE("Using FIP\n");
+ io_close(local_image_handle);
+ }
+ }
+ return result;
+}
+
+
+static int open_memmap(const uintptr_t spec)
+{
+ int result;
+ uintptr_t local_image_handle;
+
+ result = io_dev_init(memmap_dev_handle, (uintptr_t)NULL);
+ if (result == 0) {
+ result = io_open(memmap_dev_handle, spec, &local_image_handle);
+ if (result == 0) {
+ VERBOSE("Using Memmap\n");
+ io_close(local_image_handle);
+ }
+ }
+ return result;
+}
+
+
+void ls_io_setup(void)
+{
+ int io_result;
+
+ io_result = register_io_dev_fip(&fip_dev_con);
+ assert(io_result == 0);
+
+ io_result = register_io_dev_memmap(&memmap_dev_con);
+ assert(io_result == 0);
+
+ /* Open connections to devices and cache the handles */
+ io_result = io_dev_open(fip_dev_con, (uintptr_t)NULL,
+ &fip_dev_handle);
+ assert(io_result == 0);
+
+ io_result = io_dev_open(memmap_dev_con, (uintptr_t)NULL,
+ &memmap_dev_handle);
+ assert(io_result == 0);
+
+ /* Ignore improbable errors in release builds */
+ (void)io_result;
+}
+
+void plat_ls_io_setup(void)
+{
+ ls_io_setup();
+}
+
+int plat_ls_get_alt_image_source(
+ unsigned int image_id __unused,
+ uintptr_t *dev_handle __unused,
+ uintptr_t *image_spec __unused)
+{
+ /* By default do not try an alternative */
+ return -ENOENT;
+}
+
+/*
+ * Return an IO device handle and specification which can be used to access
+ * an image. Use this to enforce platform load policy.
+ */
+int plat_get_image_source(unsigned int image_id, uintptr_t *dev_handle,
+ uintptr_t *image_spec)
+{
+ int result;
+ const struct plat_io_policy *policy;
+
+ assert(image_id < ARRAY_SIZE(policies));
+
+ policy = &policies[image_id];
+ result = policy->check(policy->image_spec);
+ if (result == 0) {
+ *image_spec = policy->image_spec;
+ *dev_handle = *(policy->dev_handle);
+ } else {
+ VERBOSE("Trying alternative IO\n");
+ result = plat_ls_get_alt_image_source(image_id, dev_handle,
+ image_spec);
+ }
+
+ return result;
+}
--- /dev/null
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <mmio.h>
+#include <delay_timer.h>
+#include <arch_helpers.h>
+
+#define TIMER_BASE_ADDR 0x02B00000
+
+uint64_t ls_get_timer(uint64_t start)
+{
+ return read_cntpct_el0() * 1000 / read_cntfrq_el0() - start;
+}
+
+static uint32_t ls_timeus_get_value(void)
+{
+ /*
+ * Generic delay timer implementation expects the timer to be a down
+ * counter. We apply bitwise NOT operator to the tick values returned
+ * by read_cntpct_el0() to simulate the down counter. The value is
+ * clipped from 64 to 32 bits.
+ */
+ return (uint32_t)(~read_cntpct_el0());
+}
+
+static const timer_ops_t ls_timer_ops = {
+ .get_timer_value = ls_timeus_get_value,
+ .clk_mult = 1,
+ .clk_div = 25,
+};
+
+
+/*
+ * Initialise the nxp layerscape on-chip free rolling us counter as the delay
+ * timer.
+ */
+void ls_delay_timer_init(void)
+{
+ uintptr_t cntcr = TIMER_BASE_ADDR;
+
+ mmio_write_32(cntcr, 0x1);
+
+ timer_init(&ls_timer_ops);
+}
--- /dev/null
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include "plat_ls.h"
+
+/*******************************************************************************
+ * This function validates an MPIDR by checking whether it falls within the
+ * acceptable bounds. An error code (-1) is returned if an incorrect mpidr
+ * is passed.
+ ******************************************************************************/
+int ls_check_mpidr(u_register_t mpidr)
+{
+ unsigned int cluster_id, cpu_id;
+ uint64_t valid_mask;
+
+ valid_mask = ~(MPIDR_CLUSTER_MASK | MPIDR_CPU_MASK);
+ cluster_id = (mpidr >> MPIDR_AFF1_SHIFT) & MPIDR_AFFLVL_MASK;
+ cpu_id = (mpidr >> MPIDR_AFF0_SHIFT) & MPIDR_AFFLVL_MASK;
+
+ mpidr &= MPIDR_AFFINITY_MASK;
+ if (mpidr & valid_mask)
+ return -1;
+
+ if (cluster_id >= PLAT_LS_CLUSTER_COUNT)
+ return -1;
+
+ /*
+ * Validate cpu_id by checking whether it represents a CPU in
+ * one of the two clusters present on the platform.
+ */
+ if (cpu_id >= plat_ls_get_cluster_core_count(mpidr))
+ return -1;
+
+
+ return 0;
+}
--- /dev/null
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <debug.h>
+#include <mmio.h>
+#include <endian.h>
+#include "platform_def.h"
+#include "soc_tzasc.h"
+
+int tzc380_set_region(unsigned int tzasc_base, unsigned int region_id,
+ unsigned int enabled, unsigned int low_addr,
+ unsigned int high_addr, unsigned int size,
+ unsigned int security, unsigned int subreg_disable_mask)
+{
+ unsigned int reg;
+ unsigned int reg_base;
+ unsigned int attr_value;
+
+ reg_base = (tzasc_base + TZASC_REGIONS_REG + (region_id << 4));
+
+ if (region_id == 0) {
+ reg = (reg_base + TZASC_REGION_ATTR_OFFSET);
+ mmio_write_32((uintptr_t)reg, ((security & 0xF) << 28));
+ } else {
+ reg = reg_base + TZASC_REGION_LOWADDR_OFFSET;
+ mmio_write_32((uintptr_t)reg,
+ (low_addr & TZASC_REGION_LOWADDR_MASK));
+
+ reg = reg_base + TZASC_REGION_HIGHADDR_OFFSET;
+ mmio_write_32((uintptr_t)reg, high_addr);
+
+ reg = reg_base + TZASC_REGION_ATTR_OFFSET;
+ attr_value = ((security & 0xF) << 28) |
+ ((subreg_disable_mask & 0xFF) << 8) |
+ ((size & 0x3F) << 1) | (enabled & 0x1);
+ mmio_write_32((uintptr_t)reg, attr_value);
+
+ }
+ return 0;
+}
+
+int tzc380_setup(void)
+{
+ int reg_id = 0;
+
+ INFO("Configuring TZASC-380\n");
+
+ /*
+ * Configure CCI control override register to terminate all barrier
+ * transactions
+ */
+ mmio_write_32(PLAT_LS1043_CCI_BASE, CCI_TERMINATE_BARRIER_TX);
+
+ /* Configure CSU secure access register to disable TZASC bypass mux */
+ mmio_write_32((uintptr_t)(CONFIG_SYS_FSL_CSU_ADDR +
+ CSU_SEC_ACCESS_REG_OFFSET),
+ bswap32(TZASC_BYPASS_MUX_DISABLE));
+
+ for (reg_id = 0; reg_id < MAX_NUM_TZC_REGION; reg_id++) {
+ tzc380_set_region(CONFIG_SYS_FSL_TZASC_ADDR,
+ reg_id,
+ tzc380_reg_list[reg_id].enabled,
+ tzc380_reg_list[reg_id].low_addr,
+ tzc380_reg_list[reg_id].high_addr,
+ tzc380_reg_list[reg_id].size,
+ tzc380_reg_list[reg_id].secure,
+ tzc380_reg_list[reg_id].sub_mask);
+ }
+
+ return 0;
+}
--- /dev/null
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <mmio.h>
+#include <endian.h>
+#include <debug.h>
+#include "ns_access.h"
+#include "platform_def.h"
+
+static void enable_devices_ns_access(struct csu_ns_dev *ns_dev, uint32_t num)
+{
+ uint32_t *base = (uint32_t *)CONFIG_SYS_FSL_CSU_ADDR;
+ uint32_t *reg;
+ uint32_t val;
+ int i;
+
+ for (i = 0; i < num; i++) {
+ reg = base + ns_dev[i].ind / 2;
+ val = be32toh(mmio_read_32((uintptr_t)reg));
+ if (ns_dev[i].ind % 2 == 0) {
+ val &= 0x0000ffff;
+ val |= ns_dev[i].val << 16;
+ } else {
+ val &= 0xffff0000;
+ val |= ns_dev[i].val;
+ }
+ mmio_write_32((uintptr_t)reg, htobe32(val));
+ }
+}
+
+void enable_layerscape_ns_access(void)
+{
+ enable_devices_ns_access(ns_dev, ARRAY_SIZE(ns_dev));
+}
--- /dev/null
+#
+# Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+# TSP source files common to ARM standard platforms
+BL32_SOURCES += plat/layerscape/common/ls_topology.c \
+ plat/layerscape/common/tsp/ls_tsp_setup.c \
+ plat/common/aarch64/platform_mp_stack.S
--- /dev/null
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <gicv2.h>
+#include <debug.h>
+#include "ls_16550.h"
+#include "plat_ls.h"
+#include "soc.h"
+
+#define BL32_END (unsigned long)(&__BL32_END__)
+
+const unsigned int g0_interrupt_array1[] = {
+ 9
+};
+
+gicv2_driver_data_t ls_gic_data = {
+ .gicd_base = GICD_BASE,
+ .gicc_base = GICC_BASE,
+ .g0_interrupt_num = ARRAY_SIZE(g0_interrupt_array1),
+ .g0_interrupt_array = g0_interrupt_array1,
+};
+
+/*******************************************************************************
+ * Initialize the UART
+ ******************************************************************************/
+void ls_tsp_early_platform_setup(void)
+{
+ static console_ls_16550_t console;
+ /*
+ * Initialize a different console than already in use to display
+ * messages from TSP
+ */
+ console_ls_16550_register(PLAT_LS1043_UART2_BASE, PLAT_LS1043_UART_CLOCK,
+ PLAT_LS1043_UART_BAUDRATE, &console);
+ NOTICE(FIRMWARE_WELCOME_STR_LS1043_BL32);
+}
+
+/*******************************************************************************
+ * Perform platform specific setup placeholder
+ ******************************************************************************/
+void tsp_platform_setup(void)
+{
+ uint32_t gicc_base, gicd_base;
+
+ /* Initialize the GIC driver, cpu and distributor interfaces */
+ get_gic_offset(&gicc_base, &gicd_base);
+ ls_gic_data.gicd_base = (uintptr_t)gicd_base;
+ ls_gic_data.gicc_base = (uintptr_t)gicc_base;
+ gicv2_driver_init(&ls_gic_data);
+ gicv2_distif_init();
+ gicv2_pcpu_distif_init();
+ gicv2_cpuif_enable();
+}
+
+/*******************************************************************************
+ * Perform the very early platform specific architectural setup here. At the
+ * moment this is only intializes the MMU
+ ******************************************************************************/
+void tsp_plat_arch_setup(void)
+{
+ ls_setup_page_tables(BL32_BASE,
+ (BL32_END - BL32_BASE),
+ BL_CODE_BASE,
+ BL_CODE_END,
+ BL_RO_DATA_BASE,
+ BL_RO_DATA_END
+#if USE_COHERENT_MEM
+ , BL_COHERENT_RAM_BASE,
+ BL_COHERENT_RAM_END
+#endif
+ );
+ enable_mmu_el1(0);
+}
--- /dev/null
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef __PLATFORM_TSP_H__
+#define __PLATFORM_TSP_H__
+
+/*******************************************************************************
+ * Mandatory TSP functions (only if platform contains a TSP)
+ ******************************************************************************/
+void tsp_early_platform_setup(void);
+void tsp_plat_arch_setup(void);
+void tsp_platform_setup(void);
+
+#endif /* __PLATFORM_TSP_H__ */
projects / project / bcm63xx / atf.git / commitdiff